796059
49
Zoom out
Zoom in
Previous page
1/236
Next page
49
GB IE
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush. Do not
use cleaning agents or solvents. You
may otherwise irreparably damage the
appliance.
After every trimming session, remove
grass and soil from the protective cover
and the trimming assembly.
Be careful with the line cutter. It can
cause serious lacerations.
Winding up the spool
As an alternative to a new spool, you can
purchase a 2.4 mm-thick, 5 m-long nylon
thread in specialist shops and wind this
yourself onto the spool.
1. Pull the new line through both line out-
let loops (32) of the spool cap (15).
2. Make a longitudinal adjustment with
both ends of the line so that the spool
cap (15) is positioned at about the cen-
tre.
3. Turn the rotary knob (15a) in the direc-
tion of the arrow indicated on the bot-
tom of the spool cap (15) to wind the
line onto the spool (33).
General maintenance work
Check the appliance before each use
for obvious defects such as loose, worn
or damaged parts.
Check the covers and protective devic-
es for damage and correct  t. Replace
these if necessary.
Check the line cutter (26). Never
use the device without a line cutter
or with a defective line cutter. If the line cut-
ter is damaged, be sure to contact one of
our customer service centres.
Removing blockages
Switch the device off and re-
move both batteries before
you work on the cutting unit.
Wear protective gloves in order to
avoid cutting yourself.
Transport
When it is being transported, the de-
vice must be switched off and the bat-
teries removed.
Carry the device with one hand on the
upper shaft tube and the other hand on
the lower shaft tube (3+6), in order to
avoid coming into contact with danger-
ous parts when transporting it (e.g. hot
engine, cutting unit).
When transporting the blade, use the
transport protection.
Maintain a safe distance from other
people when transporting the device.
Storage
Store the trimmer in a dry place well
out of reach of children.
Do not stand the trimmer on its protec-
tive cover. Suspend it by its upper han-
dle in such a manner that the protective
cover does not come into contact with
other objects. This is because the pro-
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPFSA 40-Li A1 - IAN 376667 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPFSA 40-Li A1 - IAN 376667 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info