796059
40
Zoom out
Zoom in
Previous page
1/236
Next page
40
GB IE
down when starting or in the working
position.
Do not cross any gravel roads or paths
with the device running.
12. Extreme caution is required when ex-
tending the cutting line. There is a risk
of cutting injuries. After performing
these steps, the device must be brought
back into the correct working position
before being re-started.
13. Do not use any metallic cutting spools.
Note that the device will continue to
operate for a few seconds after you let
go of the switch.
14. Switch the motor off (on/off switch off)
if:
- Fuelling the device,
- Not using it,
- Leaving it unattended,
- Cleaning it,
- Transporting it from one location to
another,
- Removing or replacing the cutting
unit or adjusting the length of the
cutting line by hand.
15. Length of use and breaks
Prolonged use of the motorised device
can lead to problems with the blood
circulation in the hands caused by vi-
brations. You can however extend your
machine use time by wearing appropri-
ate gloves or by taking regular breaks.
Please ensure that if you are susceptible
to poor circulation, low outside temper-
atures or strong gripping forces while
working, this may reduce the length of
time for which you are able to work.
16. Prolonged use of this motorised device
can lead to hearing damage if appro-
priate hearing protection is not worn.
Wear personal hearing protec-
tion, e.g. ear plugs, to reduce the risk
of hearing damage.
17. Carry the strimmer by the upper and
lower shaft tube when it is switched off,
with the cutting unit pointing away from
your body in order to avoid injuries.
After the device has been switched off,
the motor head of the scythe is hot.
Make sure that you do not come into
contact with the motor head.
18. Regularly check whether the cutting
equipment is at a standstill when idling.
19. National regulations may specify an
age restriction for the user.
20. Be aware that the following circum-
stances can lead to damage to the de-
vice and serious injuries to the person
operating it:
- improper maintenance,
- use of non-compliant spare parts,
- the removal or modication of safety
devices.
21. Caution! Local regulations may restrict
use of the machine.
22. Always maintain the device and cutting
tool in a good condition.
23. Before use, check the device for loose
fastenings, fuel leaks and damaged
parts, such ascracks in the cutting at-
tachments.
24. Take breaks and change your working
position regularly.
25. Warning! There are sharp edges on the
string trimmer. Gloves need to be worn.
26. In order to detect signicant defects,
a visual inspection needs to be per-
formed before each use, after the de-
vice is dropped or if it suffers any kind
of impact.
27.Wear both non-slip foot protection
and protective clothing when using the
string trimmer.
28. Never use the machine if you are tired,
ill or under the inuence of alcohol or
other drugs.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPFSA 40-Li A1 - IAN 376667 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPFSA 40-Li A1 - IAN 376667 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info