796059
39
Zoom out
Zoom in
Previous page
1/236
Next page
39
GB IE
especially when starting the device. Al-
ways keep the hand on the additional
handle free.
2. Always hold the device with
both hands on the multifunction
handlebars. Always keep the device
at a suitable safety distance from the
body and maintain a stable body pos-
ture.
3. Always wear safety goggles.
4. Only use the device in daylight or
where there is good articial lighting.
5. Do not use the device in the rain or on
wet grass.
6. Check the device for damage before
use or after an impact, and repair if
necessary.
7. Do not use the device if the safety
equipment is damaged or incorrectly
installed.
8. Ensure that the motor’s ventilation slits,
the protective cover and cutting unit are
always free of dirt or residual material.
9. During the work process, always
ensure that there are no people or ani-
mals within a radius of at least 15 m.
Immediately switch off the machine if
anyone, especially children, gets within
range of the machine.
When using the device, stones
and other objects can be eject-
ed, which may lead to serious
injuries.
10. When the device is in operation, do
not get near to the moving parts (within
the cutting unit area). The cutting
head will keep rotating for a
few seconds after the device has
been switched off.
11. Before using the device, stones, twigs
and any other solid material must be
removed from the work area.
Only start the machine as described
in the manual. It must not be upside
nance and repairs. Spare parts are
available from our online shop (see
“Spare parts/Accessories”).
Warning! The use of other
mower heads as well as ac-
cessories and attachments that are
not expressly recommended can
endanger people and property. The
tool may only be used for the in-
tended purpose. Any use other
than for the intended purpose is
considered improper use. The user
is solely responsible for property
damage and personal injury result-
ing from such improper use; the
manufacturer bears no liability un-
der any such circumstance.
The manufacturer cannot be held li-
able if its machines are modied or
used improperly and if this results
in damage to people or property.
Attention! Even if the tool is used
properly, there is always a certain
level of residual risk that cannot
be excluded. Due the nature and
design of the tool, the following
potential hazards can be deduced:
Contact with the unprotected spool (cut-
ting injuries)
Reaching into the running spool (cutting
injuries)
Hearing damage if adequate protection
is not worn
Harmful dust or gas formation when us-
ing the device in closed rooms (nausea)
Additional safety rules
To prevent personal injury and
damage to property:
1. Caution! Always keep your hands
and feet away from the cutting area,
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PPFSA 40-Li A1 - IAN 376667 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PPFSA 40-Li A1 - IAN 376667 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info