779496
25
Zoom out
Zoom in
Previous page
1/108
Next page
25
IEGB
(20) into the water tank and suction
up the water.
3. Empty the stainless steel container
immediately after suction cleaning be-
cause it is not designed to store liquids
(see „Cleaning/Maintenance“).
Never reach into the water to
be suctioned up. Danger of
electric shock.
When the container ( 9) is full,
the suction opening is shut off by
a oat, and suction is then cut off.
Switch the appliance off, remove
the plug from the socket and empty
the container (see “Cleaning/Main-
tenance”).
If foam or liquid exits, switch off the
machine immediately.
Blow function
Operation without the use of a lter
is recommended.
Connect the suction hose (19) to the
connecting blower (15) on the motor
head (3).
Filter cleaning button
Insert the mains plug of the device
and turn the device on.
If the suction power decreases, you can
improve it by pressing the lter cleaning
button ( 28).
1. Turn the device on.
2. Close the suction opening of the suc-
tion hose by hand.
3. Press the lter cleaning button ( 28).
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning the device
Never hose the device down with
water. Never use aggressive clean-
ing agents or solvents. This could
damage the appliance.
After use, empty the stainless steel con-
tainer ( 9):
- Opening the drain plug to allow
the vacuumed liquid to drain out
( 10). A liquid residue remains
in the container.
To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head ( 3): x
the bow handle with the locking
levers (14), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
bottom of the container and pour
out the residual liquid.
Clean the waste tank with a damp
cloth.
Wash the foam lter ( 21) with luke-
warm water and soap, and allow to
dry.
Beat the dust out of the uted lter
( 23) and clean it with a paint brush
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNTS 1400 H4 - IAN 322475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNTS 1400 H4 - IAN 322475 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info