779496
23
Zoom out
Zoom in
Previous page
1/108
Next page
23
IEGB
the machine.
Store the appliance in a dry
place and out of reach of chil-
dren.
Assembly
Pull out the mains plug.
Danger of electric shock.
The appliance is supplied with the
folded lter ( 23) tted.
1. Place the 5 steering castors (11) onto
the mounts on the stainless steel con-
tainer (9).
2. Push the bow handle (1) onto the two
bow handle tie bars (2) and screw it in
place with 2 crosshead bolts (1a).
3. Place the motor head (3) on the stain-
less steel container (9).
4. Close the stainless steel container by
folding up the bow handle and xing it
with the locking levers (14). everal po-
sitions are possible for the bow handle.
The locking lever must be tightened so
that a tensioning with medium force
can be carried out. You can set the ten-
sion by turning the locking lever:
- Tighten: turn clockwise
- Loosen: turn anti-clockwise.
5. Place the carrying handle (4) on the
motor head (3) and screw it on tight
with 2 crosshead screws (4a).
6. Fit the accessories:
- Connect the suction hose (19).
- Fit the handle (20)
- Fit the telescopic suction pipe (17).
(Press the knob on the telescopic suc-
tion pipe in the direction and
separate to the desired length).
- Fit the desired nozzle (25/26).
Never vacuum without a lter!
To store the suction set during
breaks, push together the telescopic
suction hose (17) and plug the suc-
tion pipe holder (18) into the socket
on the motor housing (see picture
below).
Operation
Fully unwind the suction hose
( 19) before commencing work.
Switching on/off
Connect the mains plug.
Do not vacuum without a lter!
(How to insert the lter is described
in the chapters dry vacuuming“
and “wet vacuuming“).
Switching On:
On/Off Switch ( 6) In position I“.
Switching Off:
On/Off Switch ( 6) In position 0”.
Dry vacuuming
The appliance is supplied with the
folded lter (23) tted.
Vacuuming with a uted lter:
1. For dry vacuuming, t the uted lter
(23) onto the lter basket (27) on the
motor head (3)
If the sealing lip of the folded lter
(23) does not spontaneously touch
the motor head (3), turn the cover
plate (22) a little without force until
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNTS 1400 H4 - IAN 322475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNTS 1400 H4 - IAN 322475 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info