679111
10
Zoom out
Zoom in
Previous page
1/24
Next page
PNS 300 A1
GB
IE
 7
Using the bit holder
After removing the chuck you can use the bit
holder .
Insert a suitable bit into the bit holder
.
Push the bit into the bit holder
as far as the
stop.
The guidance and the magnetic holder keep the
bit firmly in place.
To remove the bit, pull it out of the bit holder
.
Use
Switching on and off
Switching the appliance on:
Press the ON/OFF switch
.
Switching the appliance off:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
. Lock it in the
pressed position with the locking button
.
Switching off continuous operation:
Press the ON/OFF switch
and release it
again.
Adjusting the rotational speed
Press the ON/OFF switch lightly for a low
speed. Increasing the pressure increases the speed.
Changing the direction of rotation
WARNING!
The rotation direction switch
may only
be used/adjusted if the appliance is at a
standstill.
Change the direction of rotation by pressing
the rotation direction switch
towards the left
or right.
Activate lock
Push the rotation direction switch into the
middle position. The ON/OFF switch
is
blocked.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
The appliance is maintenance-free.
The appliance must always be kept clean, dry
and free from oil or grease.
Never allow liquids to get into the appliance.
Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
WARNING!
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
Spare parts which are not listed (e.g. carbon
brushes, switches, can be ordered using our
service hotline.
Have the carbon brushes replaced by the
manufacturer, by Customer Service or a
similarly qualified person.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNS 300 A1 - IAN 302394 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNS 300 A1 - IAN 302394 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PNS 300 A1 - IAN 302394

Parkside PNS 300 A1 - IAN 302394 User Manual - German, Dutch, French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info