679111

Parkside PNS 300 A1 - IAN 302394 Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
PNS 300 A1
■6 
│
 GB
│
IE
Before use
WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance.
Changing tools
Your appliance has a fully automatic spindle lock
.
When the motor is stopped, the power train locks
so that the chuck
can be opened by turning
it
. After you have attached the desired tool
and tightened it by turning the chuck
, you can
continue working. The spindle lock is automatically
released when the motor starts (ON/OFF switch
pressed).
Torque preselection/selecting the
operating mode
You can adjust the torque on the torque selection
ring
and select the drill setting .
♦ Select a low level for small screws or soft
materials.
♦ Select a high level for large screws, hard materi-
als or removing screws.
♦ Select the drill setting for drilling work by
adjusting the torque selection ring
to the
position
.
2-speed gearbox
CAUTION!
► Operate the speed selector switch
only
when the appliance is at a standstill. Other-
wise, the appliance could be damaged.
In first gear (speed selector switch
in posi-
tion: 1)
you can reach a speed of approx. 400 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear (speed selector switch
in
position: 2)
you can reach a speed of approx. 1600 rpm for
carrying out drilling work.
Removing the chuck
If you want to use the bit holder , you must
remove the chuck .
Removing the chuck:
♦ Hold the chuck
firmly from the front.
♦ Pull/push the chuck ring
in the direction of
the chuck .
The chuck is now unlocked and can be
removed towards the front.
Attaching the quick-release chuck:
♦ To replace the chuck
, pull the chuck ring
towards the quick-release chuck and push the
chuck fully on.
NOTE
► If the chuck
does not automatically click
into place, turn the chuck ring .
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PNS 300 A1 - IAN 302394 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PNS 300 A1 - IAN 302394 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PNS 300 A1 - IAN 302394

Parkside PNS 300 A1 - IAN 302394 User Manual - German, Dutch, French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info