762980
27
Zoom out
Zoom in
Previous page
1/253
Next page
27GB/IE/NI/CY/MT
of the direction of movement on the
properties of the weld seam:
Note: You decide for yourself which
type of welding is most suitable, once
you have welded a sample piece.
Note: Once it has worn down com-
pletely, the electrode must be replaced.
Push welding Drag welding
Burn smaller larger
Weld seam width larger smaller
Weld bead atter higher
Weld seam fault larger smaller
TIG welding
For TIG welding please follow the
instructions for your TIG torch. You can
select TIG mode by pressing the
welding mode selector key
35
. To do
this select the “TIG” position.
Maintenance and cleaning
Note: The welding device must be
regularly serviced and overhauled for
proper function and for compliance
with the safety requirements. Improper
and wrong operation may cause fail-
ures and damage to the device. Repairs
must only be carried out by qualifi ed
electricians.
Switch off the main power supply
and the main switch of the device
off prior to performing any mainte-
nance work on the welding device.
Clean the welding device and
accessories regularly using air,
cotton waste or a brush.
In case of a defect or a necessary
replacement of equipment parts,
please contact the appropriate
qualifi ed personnel.
Information about
recycling and disposal
Don’t throw away –
recycle!
Please return this device,
accessories and packaging to
your local recycling depot.
Donot dispose of the welding
device in household waste, in
re or in water. Devices that are
no longer functional should be recycled
wherever possible. Ask your local
stockist for advice. To do this, please
see 2012/19/EU.
... / TIG welding / Maintenance and cleaning / Information about recycling ...
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMSG 200 A1 - IAN 337263 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMSG 200 A1 - IAN 337263 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info