762980
9
Zoom out
Zoom in
Previous page
1/253
Next page
9GB/IE/NI/CY/MT
Introduction
12
Welding nozzle (0.8 mm)
13
Welding nozzle (0.9 mm)
14
Welding nozzle (1.0 mm)
15
Solid welding wire spool (aluminium)
Ø 1 mm / 200 g (pre-fi tted)
16
Flux-cored welding wire spool (steel)
Ø 1 mm / 200 g
17
Chipping hammer with wire brush
18
Feed roll
19
Shield body
20
Dark welding lens
21
Handle
22
Welding mask after fi tting
23
Mounting clip
24
Protective glass catch
25
Setting screw
26
Thrust roller unit
27
Roller holder
28
Feed roll holder
29
Wire outlet
30
Cable assembly bracket
31
Torch neck
32
Plug
33
Gas connection
34
MMA electrode holder
35
Welding mode selector key
36
Welding wire selector key
37
Voltage reducer selector key
38
Fixing ring
Technical specifi cations
Input power: 4.3 kW
Mains connection: 230 V~ 50 Hz
Weight: 8.6 kg
Fuse: 16 A
Welding with fl ux-cored wire:
Welding current: I2 = 72–160 A
Duty cycle X:
20% at 160 A
welding current,
60% at 92 A
welding current
Open circuit voltage: U0 = 53 V
Greatest rated value of
the mains current: I1max.= 26.5 A
Effective value of the
greatest mains current: I1eff. =11.9 A
Welding wire reel
max.: approx. 5000 g
Welding wire diameter
max.: 1.0 mm
Characteristic value Flat
MMA welding:
Welding current: I2 = 63–140 A
Duty cycle X:
20% at 140 A
welding current,
60% at 81 A
welding current
Open circuit voltage: U0 = 53 V
Greatest rated value of
the mains current: I1max.= 26.3 A
Effective value of the
greatest mains current: I1eff. =11.8 A
Characteristic value Falling
TIG welding:
Welding current: I2 = 63–200 A
Duty cycle X:
10% at 200 A
welding current,
60% at 82 A
welding current
Open circuit voltage: U0 = 16.9 V
Greatest rated value of
the mains current: I1max.= 28.2 A
Effective value of the
greatest mains current: I1eff. =8.9 A
Characteristic value Falling
Changes to technical and visual aspects
of the product may be made as part
of future developments without notice.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMSG 200 A1 - IAN 337263 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMSG 200 A1 - IAN 337263 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info