Manual Parkside PMSG 200 A1 - IAN 337263 (page 7 of 253) (English, German, Dutch, Danish, French, Polish, Spanish)

762980

Zoom out

Zoom in

1/253

7GB/IE/NI/CY/MT

List of pictograms used / Introduction

List of pictograms used

Metal inert and active gas

welding including the use of

ﬂ ux-cored wire

Manual arc welding with

encased rod electrodes

Tungsten inert gas welding

Direct current U0

Rated value of the open

circuit voltage

Rated value of the mains

voltage

MULTI-WELDER PMSG 200 A1

Introduction

Congratulations! You have

purchased one of our high-quality

devices. Please familiarise yourself with

the product before using it for the ﬁ rst

time. To do so, please read through the

following operating and safety instruc-

tions carefully. This tool must be set up

or used only by people who have been

trained to do so.

KEEP OUT OF THE REACH OF

CHILDREN!

 Intended use

The device is designed for MIG welding

(welding with welding wire and inert

gas), MMA welding (welding with rod

electrodes) and TIG welding (tungsten

inert gas welding). When using solid

wires which do not contain inert gas in

solid form, then you must use inert gas

in addition. When using aluminium solid

wire, then you must use argon as the

inert gas. When using self-shielding ﬂ ux-

cored wire, you do not need to use any

additional gas. In this case, the inert gas

is contained in the welding wire in pow-

dered form and is therefore channelled

straight into the arc. This means that the

device is not susceptible to wind when

working outdoors. Only suitable wire

electrodes may be used for the device.

This welding device is designed for

manual arc welding (MMA welding) of

steel, stainless steel, steel sheet and cast

materials, using the appropriate coated

electrodes. Refer to the information from

the electrode manufacturer. Only suitable

electrodes may be used for the device.

For tungsten inert gas welding (TIG

welding) it is essential that you observe

the operating and safety instructions for

the TIG torch you are using, in addition

to the instructions and safety instructions

in these operating instructions. If it is

not handled properly the product can

be dangerous for individuals, animals

and property. The welding mask must

only be used with protective welding

glasses as well as prescription glasses

which are marked appropriately, used

properly and as a general rule, are only

used for welding. The welding mask

is not designed for laser welding! Use

the product only as described and only

for the speciﬁ c applications as stated.

Keep these instructions in a safe place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMSG 200 A1 - IAN 337263 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMSG 200 A1 - IAN 337263 Manual

Product: