764042

Parkside PMH 2400 A1 Manual

28
Zoom out
Zoom in
Previous page
1/124
Next page
28
GB IE
• Fill the hopper with the material to be
shredded. When feeding branches into
the machine, hold them until they feed
in automatically. The material is drawn
in and shredded.
• Be sure to keep to the infeed speed of
the shredder and do not overload the
machine.
• To prevent clogging, alternate the
shredding of branches with thin twigs
and wilted garden waste that has been
stored for several days.
• Remove soil and stones from roots
before shredding to prevent the blades
becoming blunt sooner than necessary.
• Do not shred soft, damp material such
as kitchen waste. Compost it instead.
• Pick up a few dry branches at the end
and use them to help clean the machi-
ne.
• Only switch off the machine when all
shredded material has passed through
the blade area. Otherwise, the blade
may become blocked when restarting.
Removing blockages
Before any maintenance or clea-
ning work, turn the machine off,
pull out the mains plug and wait for
the blades to stop. There is a risk to
life and limb through electric shock,
re and rotating blades.
• Ensure that the power cable (5) is
disconnected from the mains supply.
• Release the housing lock (9).
• Tilt the front section of the shredder’s
housing forwards.
You can also completely remove the
front section of the housing and place
it aside. To do so, loosen the housing
lock (9) and remove the front section of
the housing upwards vertically.
• This gives you free access to the blades
(17).
Wear safety gloves.
There is a risk of injury.
• You can now remove the blockage in
the machine.
The machine features a
safety switch.
The housing lock has to be
tightened again by hand as
otherwise the machine will
not be able to be started
later.
Maintenanceand
cleaning
Have any work that is not
described in these instruc-
tions performed by an autho-
rised customer service centre.
Only use original parts.
Wear gloves when handling the
blade. There is a risk of injury.
Before any maintenance or clea-
ning work, turn the machine off,
pull out the mains plug and wait for
the blade to stop. There is a risk to
life and limb through electric shock,
re and rotating blades.
General cleaning and
maintenance work
Do not spray down the
shredder with water.
Danger of electric shock!
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMH 2400 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMH 2400 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info