Manual Parkside PMH 2400 A1 - IAN 356315 (page 29 of 125) (English, German, Dutch, French, Polish)

764039

Zoom out

Zoom in

1/125

GB IE

• Always keep the machine, wheels and

ventilation holes clean. Use a brush or

cloth for cleaning, but do not use any

cleaning agents or solvents.

• Check the machine, especially the

protective equipment, before each use

for damage such as loose, worn or da-

maged parts. Ensure that all nuts, bolts

and screws are rmly in place.

• Check the covers and protective devi-

ces for damage and correct t. Replace

these if necessary.

• Store the machine in a dry place out

of reach of children. Do not enclose

the machine in nylon sacks as this may

cause moisture to form.

Turning or replacing

blades

Before any maintenance or clea-

ning work, turn the machine off,

pull out the mains plug and wait for

the blades to stop. There is a risk to

life and limb through electric shock,

re and rotating blades.

1. Ensure that the power cable (5) is

disconnected from the mains supply.

2. Release the housing lock (9).

3. Tilt the front section of the shredder’s

housing forwards. You can completely

remove it and place it aside to give

you free access to the blades (17).

To do so, loosen the housing lock (9)

and remove the front section of the

housing upwards vertically.

4. Block the blade plate (18) such as

with a screwdriver (not included in the

scope of delivery).

Guide the screwdriver through the ac-

cess hole (19) and carefully rotate the

blade plate (18) until you reach one

of the two blocking openings. You can

now guide the screwdriver through the

blade plate (18) to block it.

5. You can use the Allen key (8) to loosen

the two screws (20) and remove the

blade (17).

The blades have two cutting edges,

which can be turned around.

Always replace and turn the blades

in pairs. Do not attempt to sharpen

the blades!

Spare parts are available from

our online shop (see “Spare parts/

Accessories”).

6. When mounting the blade, please

be sure to use only new screws

and fasten them with 16 Nm of torque

using a torque wrench.

The machine features a

safety switch. The housing

lock has to be tightened again

by hand as otherwise the

machine will not be able to

be started later.

Storage

• Store the machine in a dry place out of

reach of children.

• Give the machine time to cool off be-

fore you store the machine in an enclo-

sed space.

We are not liable for damages caused by

our machine. Insofar as these are caused

by improper repair or the use of non-origi-

nal parts or use contrary to instructions.

What is the part number for spare carbon brushes for the motor (item 49 on the exploded drawing in the manual)? Submitted on 25-2-2023 at 15:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMH 2400 A1 - IAN 356315 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMH 2400 A1 - IAN 356315 Manual

Product: