764039
27
Zoom out
Zoom in
Previous page
1/125
Next page
27
GB IE
Attaching the collection
bag
Clip the two collection bag xing points
(6) onto the two positions provided on the
right and left of the machine housing.
Operation
Initial start-up
The hopper must be empty.
Suspend the collection bag (3) from
the two collection bag xing points (6)
on the right and left of the machine
housing.
Switching on and off
Make sure that the mains voltage
matches the details on the type plate.
1. Make a loop out of the end of the ex-
tension cable and suspend this in the
cable strain relief on the mains cable
(5). See detailed illustration .
2. Connect the extension cable.
3. Turn the machine on to “I” using the
on/off switch (10).
4. To switch off, move the on/off switch
(10) back to position “0”.
Caution! Risk of injury
due to rotating blades!
The blades continue to run
after switching off.
Emptying the collection
bag
Pull out the mains plug..
Empty the collection bag promptly.
Be aware that the collection bag
lls unevenly under the discharge
chute!
1. Turn the machine on to position “0”
using the on/off switch (10).
2. Remove the collection bag (3) and
empty.
3. Suspend the collection bag (3) again
from the collection bag xing points (6).
Overload protection
If overloaded, e.g..branches which are
too thick, the machine switches off automa-
tically.
To restart, allow the machine to cool and
switch back on.
Restart lock
If the power supply is lost, the machine
does not switch itself back on once the
mains voltage is restored. To switch the
machine back on, turn the on/off switch
back to “I”.
Working instructions
General working instructions
When shredding, maintain
enough distance from the
machine as long branches
can rebound when fed in.
There is a risk of injury.
Wear eye and hearing protection.
Wear safety gloves.
There is a risk of injury.
27


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pmh-2400-a1---ian-356315

Reset search

  • What is the part number for spare carbon brushes for the motor (item 49 on the exploded drawing in the manual)? Submitted on 25-2-2023 at 15:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMH 2400 A1 - IAN 356315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMH 2400 A1 - IAN 356315 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info