634195

Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool Manual

11
Zoom out
Zoom in
Previous page
1/60
Next page
11 GB/IE
Assembly / Bringing into use / Maintenance and cleaningAssembly
Material:
Wood, metal
Use:
· Cutting and plunge sawing
· Close to the edge sawing, even in difficult to
access areas
Example: Laying parquet and other floor coverings,
including plunge sawing. (see Figs. C, E and F)
Scraping knife Z52 A2
9
Materials: Mortar / concrete residues, tile / carpet
adhesives, paint / silicone residues
Use:
· Removal of material residues, for example tile
adhesive when replacing damaged tiles
(see Fig. I)
Q
Changing the attached tool
NOTE: If you would like to use the vacuum dust
extraction device, you must connect it before attach-
ing or changing the attachment (see section on
“Connecting a vacuum dust extraction device”).
DANGER OF INJURY! Pull
the mains plug out of the mains socket
before you carry out any task on the
electrical power tool.
Remove any tool already inserted. To do this,
release the clamping screw
10
using the Allen
key
11
and take off the tool.
Place the tool (e.g. plunge saw blade
6
) on
the tool mount.
NOTE: You can place the tool in any of the
possible positions on the tool mount.
Fasten the tool in place with the clamping
screw
10
and clamping plate
4
. Tighten the
clamping screw
10
using the Allen key
11
.
Check that the tool is firmly seated.
Incorrectly or insecurely attached tools could
become lose during use and injure you.
Q
Place a sanding sheet
on the backing plate
Offer up the sanding sheet
12
to fit flushly on
one side of the backing plate
7
, then apply
the sanding sheet to the backing plate.
Q
Bringing into use
Q
Switching On / Off
Slide the ON / OFF switch
1
forwards to
switch on the device.
Slide the ON / OFF switch
1
backwards to
switch off the device.
Q
Selecting the oscillation speed
Preselect the required oscillation speed using
the oscillation speed setting wheel
2
.
NOTE: The required oscillation speed depends on
the material and the working conditions and can
be determined by means of a practical test.
Q
Maintenance and cleaning
DANGER OF INJURY! Pull
the mains plug out of the mains socket
before you carry out any task on the
electrical power tool.
Do not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
Clean the device frequently; for best results, do
this immediately after you have finished using it.
Use a dry cloth to clean the housing – under
no circumstances use petrol, solvents or clean-
ing agents that attack plastic.
A vacuum cleaner is required to thoroughly
clean the device.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool in the language / languages: French, Swedish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool

Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool User Manual - English, German, Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info