Manual Parkside PMBS 105 A1 - IAN 115751 (page 7 of 33) (English, German, Dutch)

607541

Zoom out

Zoom in

1/33

7 GB/IE

Introduction / General power tool safety warnings

3. Use the correct accessories and ensure it is in

good condition.

4. Maintain a ﬁrm grip on the product but not tense

by the designated handles and wear warm

gloves in cold weather.

5. Maintain the product according to these instruc-

tions and keep it well lubricated.

6. Plan your working time according to these in-

structions to spread higher strain over a longer

period.

Emergency

Familiarise yourself with how to

use the product by reading these

instructions in full. Remember the

safety notices and follow them strictly. This

will help you prevent risks and hazards.

1. Always pay attention when using the

product so as to recognise and res

pond

to hazards early. Intervening quickly can

prevent serious injuries and property damage.

2. Switch off the product and disconnect

from the power supply if problems

arise. Have the product repaired by a qualiﬁed

expert if necessary before using the product

again.

Remaining risks

Even with proper use of this power tool

there are always residual risks. The fol-

lowing hazards may arise in connection

with the construction and design of this

power tool:

a) Injuries and property damage caused by parts

ﬂying about.

b) Damage to health arising from vibration to the

hands and arms when using the power tool for

extended periods or used and maintained im-

properly.

c) Hearing damage when failing to use suitable

hearing protection.

This power tool gen-

erates an electromagnetic ﬁeld during use.

This ﬁeld could possibly actively or pas-

sively impact medical implants. To reduce the risk

of serious or fatal injuries we recommend persons

with medical implants consulting their physicians

and the manufacturer of the medical implant before

using this machine!

Wear ear protection!

Total vibration, EN 60745:

Vibration emission value a

= 2.334 m / s

Uncertainty K = 1.5 m / s

Note: The vibration level speciﬁed in these instruc-

tions was measured in accordance with an EN 60745

standardised measurement process and can be used

to compare equipment. The vibration emission value

speciﬁed can also serve as a preliminary assessment

of the exposure.

The vibration level will change according to the

application of the electrical tool and in some cases

may exceed the value speciﬁed in these instructions.

Regularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Try to keep the vibration loads

as low as possible. Measures to reduce the vibration

load are, e.g. wearing gloves and limiting the work-

ing time. Wherein all states of operation must be in-

cluded (e.g. times when the power tool is switched

oﬀ and times where the power tool is switched on but

running without load).

General power tool

safety warnings

Read all safety

warnings and all instructions.

Failure to follow the warnings and in-

structions may result in electric shock, ﬁre and / or

serious injury.

Save all warnings and instructions for

future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-op-

erated (cordless) power tool.

Introduction

Wieren van j buy The band 40 x 60 for thuis model belt Sander pubs 105 a1 Submitted on 24-1-2021 at 17:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMBS 105 A1 - IAN 115751 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMBS 105 A1 - IAN 115751

Parkside PMBS 105 A1 - IAN 115751 User Manual - French, Italian - 43 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMBS 105 A1 - IAN 115751 Manual

Product: