Manual Parkside PMBS 105 A1 - IAN 115751 (page 6 of 33) (English, German, Dutch)

607541

Zoom out

Zoom in

1/33

6 GB/IE

Introduction / General power tool safety warningsIntroduction

Modelling belt sander PMBS 105 A1

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product.

The instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as descri-

bed and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure that

you also pass on all the documentation with it.

Intended use

The belt sander is designed for model making, tool-

ing and shaping. However, it is also suitable for small

car repairs, e.g. bodywork. The tool can also be

used for deburring, rough machining, ﬁnish grinding,

edge breaking, paint removal, rust removal and

sharpening tools, as well as working on metal, non-

ferrous metals, wood and plastic. The device is not

intended for commercial use. Any other uses, and /

or modiﬁcations to the tool are considered improper

use and may result in serious hazards. The manufac-

turer is not liable for damage caused by improper us

Features

ON / OFF switch

Connection cable with mains plug

Connection socket

Slide for tensioner

Tensioner

Adjusting knob

Extraction adapter

Dust extractor hose

Screw clamp

Belt support

Abrasive belt

Drive roller

Notch

Scope of delivery

1 Modelling belt sander PMBS 105 A1

1 Abrasive belt (installed)

1 Extraction adapter (for external dust collection)

1 Dust extractor hose

1 Screw clamp

1 Set of instructions for use

Technical Data

Modelling belt sander PMBS 105 A1

Rated voltage: 230 V∼ 50 Hz

Operating mode:

Short term use: S2 10 min

Note: After a continuous operating time of 10

minutes, a rest period is enabled, until the device has

cooled to a temperature within 2 K (2 °C) of the

room temperature.

Rated power input: 105 W

Idle belt -

speed: 170 m / min

Idle speed: n

640 min

-1

Abrasive belt: 40 x 265 mm

Grinding surface: 60 x 40 mm

Protection class: II /

Noise and vibration data:

Measured values for noise are determined in accor-

dance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 81.20 dB(A)

Sound power level: 92.20 dB(A)

Uncertainty K: 3 dB

Vibration- and noise reduction

To minimise the impact of vibration and noise, limit

the work time, use the settings for lower vibration-

and noise emission, and wear personal protective

equipment.

Please observe the following points to minimise the

vibration- and noise emission:

1. Only use the product properly in accordance

with the design and the instructions.

2. Ensure the product is in good working order and

well maintained.

Wieren van j buy The band 40 x 60 for thuis model belt Sander pubs 105 a1 Submitted on 24-1-2021 at 17:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PMBS 105 A1 - IAN 115751 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PMBS 105 A1 - IAN 115751

Parkside PMBS 105 A1 - IAN 115751 User Manual - French, Italian - 43 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PMBS 105 A1 - IAN 115751 Manual

Product: