738760

Parkside PLVA 40-Li A1 - IAN 304407 Manual

33
Zoom out
Zoom in
Previous page
1/226
Next page
33
IEGB
• Select the appropriate working or
readjustment position (in the event of
cylinder wear) so that the implement is
not overloaded.
• Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is run-
ning can damage the grass sward.
• Always clean the implement after each
use (see “Cleaning/Maintenance”).
• After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate itself
quicker.
Transport
• Adjust the transport position (+10
mm) setting (see “Setting the Working
Position”) when transporting the imple-
ment.
• Lift the implement to transport it over
steps and sensitive surfaces (e.g. tiles).
Use the handle (
A
9).
Cleaning/maintenance
Work that has not been de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorised by
us. Only use original parts.
Wear gloves when handling the
cylinder.
Switch off the device before any
maintenance or cleaning work, pull
the ignition key ( 21), remove the
batteries ( 19) from the device
and wait for the drum ( 16/17)
to come to a stop. Warning! Risk of
injury by dangerous moving parts!
General cleaning and
maintenance work
Do not jet water onto the
implement and do not clean
itunderowingwater.This
would result in the danger of
an electric shock and the im-
plement could be damaged.
• When work has nished remove plant
residues adhering to the wheels, inside
the ventilation opening, the grass ejec-
tor opening and the cylinder. Do not
use hard or pointed objects for this
purpose as they could damage the im-
plement.
• Completely empty the collection bag.
• Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not in
keeping with their intended purpose.
Exchanging the cylinder
Switch off the device, pull the igni-
tion key ( 21), remove the bat-
teries ( 19) from the device and
wait for the drum to come to a stop.
Wear gloves when handling the
cylinder.
1. Turn the implement over.
2. Loosen the wing screw (22).
3. Pull the bearing support (24) upwards.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PLVA 40-Li A1 - IAN 304407 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLVA 40-Li A1 - IAN 304407 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info