738760

Parkside PLVA 40-Li A1 - IAN 304407 Manual

31
Zoom out
Zoom in
Previous page
1/226
Next page
31
IEGB
The collection bag is recommended
for operation with the air roller
(
A
17)!
1. Pull the collection bag over the rods.
2. Put the plastic straps of the collection
bag over the collection bag rods and
clip into the plastic straps.
Mounting the collection bag on the
implement:
3. Lift the impact protector (14).
4. Push the pins on the collection bag
rods into the socket in the implement
case.
5. Release the impact protector so that it
holds the collection bag (12) in its posi-
tion.
Removing and emptying the collec-
tion bag:
6. Lift the impact protector (13) and take
out the collection bag (12).
Operation
Please observe local regulations
concerning noise protection.
Setting the working posi-
tions
The implement has 5 principal position
settings:
+10 mm : Transport position
This position sets the maximum safety
spacing between the tool and the oor.
-3 mm : Working position
Set this position when working with a new
implement.
-3 to -12 mm : Readjustment
positions
The working position can be lowered with
increased knife and sprung tine wear.
Wear can be identied from an increas-
ingly poor result.
The readjusting depth amounts to approx.
3 mm per setting.
When the implement is deliv-
ered it is in the Transport Position
(+10mm) setting.
1. The implement must be switched off to
set the working position.
2. Adjust the depth adjustment lever
(
A
11) and allow it to lock into place
in the desired position.
Selection of a readjustment position
without the corresponding wear
can overload the motor and dam-
age the cylinder.
Inserting/removing the
rechargeable battery
Switch off the device, pull the igni-
tion key ( 21) and wait for the
drum to come to a stop.
1. To remove the battery (19) from the de-
vice, press the release button (20) on
the battery and pull the battery out.
2. To insert the battery (19), push the bat-
tery along the guide rail into the de-
vice. You will hear it click into place.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PLVA 40-Li A1 - IAN 304407 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLVA 40-Li A1 - IAN 304407 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info