Manual Parkside PLBS 48 B1 - IAN 102652 (page 13 of 110) (English, German, Dutch, Danish, French, Swedish, Finnish)

576663

Zoom out

Zoom in

1/110

13 GB/IE

Before first use / Using the product Using the product

Turn the temperature control

to set the temperature you wish

to have.

Problems will occur during soldering if an unsuitable solder wire used.

The right soldering temperature must be achieved to produce perfect

soldering. If the temperature is too low the solder does not ﬂow enough

and causes contamination of the solder at the joint, a so-called “cold

joint”. At too high a temperature, the ﬂux (ﬂowing aid) burns and the

solder does not ﬂow. The high temperatures may also damage the

workpiece.

The temperature settings suitable for most soldering tasks are given

below. The precise settings may vary, depending on the solder and the

manufacturer.

Level min = room temperature

Setting 1 = approx. 100 °C – warming up stage and for solder with a

low melting point

Setting 2 = 200 °C melting point of most common soft solders

Setting 3 = 300 °C normal operating temperature, e.g. for using

lead-free solder

Setting 4 = 400 °C high soldering temperature, e.g. for desoldering

small soldered joints

Setting 5 = 500 °C maximum soldering temperature, e.g. for desolder-

ing large soldered joints

Switching off:

Note: After use always replace the soldering pencil

into the holder.

Press the ON / OFF switch

into setting “0”.

If the device is not being used, pull the mains lead out of the mains

socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PLBS 48 B1 - IAN 102652 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PLBS 48 B1 - IAN 102652 Manual

Product: