773449
21
Zoom out
Zoom in
Previous page
1/72
Next page
GB/IE22
Troubleshooting
Fault Possible cause Solution
The fan
heater
will not
switch on.
The mains plug
is not plugged in.
Insert the mains
plug in the socket.
Socket delivering
no voltage.
Check the
house fuses.
The fan
heater
does not
heat up.
Heating level
switch 2 is not
switched on.
Set the heating
level switch 2
to the desired
operating mode.
Temperature con-
trol 4 is in the
MIN position.
Set temperature
control
4
to the
MAX position.
Faulty heating
element.
Notify customer
services.
Maintenance, Cleaning
and Storage
Always disconnect the mains plug when the fan
heater is not in use, before cleaning or in the event
of operating faults!
Clean the fan heater only when switched off and
cold.
Make sure when cleaning that no moisture pen-
etrates into the fan heater, to avoid irreparable
damage to the fan heater.
Clean the housing with a slightly damp cloth and a
mild detergent.
Use a vacuum cleaner to remove dust from the
safety guard.
Store the heater in a dry environment.
ROWI Electronics GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date
of purchase. If this product has any faults, you, the buyer,
have certain statutory rights. Your statutory rights are not
restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within three
years of the date of purchase of the product, we will
either repair or replace the product for you at our
discretion. This warranty service is dependent on you
presenting the defective appliance and the proof of
purchase (receipt) and a short written description of
the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the be-
ginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to re-
placed and repaired components. Any damage and
defects present at the time of purchase must be re-
ported immediately after unpacking. Repairs carried
out after expiry of the warranty period shall be subject
to a fee.
Scope of the warranty
This appliance has been manufactured in accordance
with strict quality guidelines and inspected meticulous-
ly prior to delivery.
The warranty covers material faults or production faults.
The warranty does not extend to product parts subject
to normal wear and tear or fragile parts such as switch-
es, batteries, baking moulds or parts made of glass.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKH 2000 A1 - IAN 320136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKH 2000 A1 - IAN 320136 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info