684713

Parkside PKGA 40-Li A1 - IAN 313870 Manual

61
Zoom out
Zoom in
Previous page
1/310
Next page
61
IEGB
Sharpen the line cutter
Never use the device without
a string cutter or defective
line cutter. There is a risk of
injury. If the thread trimming
blade is damaged, be sure to
contact our service centre.
Wear protective gloves in order to
avoid cutting yourself.
1. Switch off the engine and remove the
batteries.
2. Screw off the line cutter (15) from the
protective cover (14).
3. Clamp the line cutter (15) in a vice and
sharpen the knife with a at le. File
carefully, and always in one direction
only.
4. Screw the line cutter (15) back onto the
protective cover (14).
Winding up the spool
As an alternative to a new thread spool,
you can purchase a 1.8 - 2.0 mm-thick, 5
m-long nylon thread in specialist shops and
wind this yourself onto the thread spool.
1. Fold the thread in the middle and pla-
ce the middle of the thread in the notch
(60) of the spool (17).
Wind up the two ends in the direction
of the arrow, which is shown on the
topside of the spool
R
o
p
e
W
i
n
d
i
n
g
.
2. Then clamp the end of each thread in
one of the grooves (61) on the spool (17).
Lubricating the gears
The gear units of the attachments require
lubrication after around 10 hours of ope-
ration.
Hedge trimmer/pole pruner
To do this, use the lubricating nipples
(63/64) to press up to 5 g of standard
grease into the gearbox housing with a
grease gun.
Trimmer/brush cutter
1. Release the screw (65) on the gears.
2. Insert up to 5 g of commercially-availa-
ble lubricating grease into the lubricati-
on opening on the gearbox housing.
3. Close the gears again using the screw
(65).
Storage
• Store the device in the transport pro-
tection (
A
9/10) provided in a dry
location and out of reach of children.
Store the appliance in horizontal posi-
tion or secured against toppling over.
• Store the 3-tooth blade (
A
12) with the
supplied transport protection (
A
13)
attached.
• For storage, you can hang the unit at
the bottom of the motor unit.
• Empty the oil tank if it will not be used
for a prolonged period of time (6-8
weeks).
• Clean the device and accessories ca-
refully before storage.
• Store the device in a dry and dustpro-
of location and out of reach of child-
ren.
• Do not wrap the device in plastic bags
as moisture and mildew may form.
• Do not lie the device down on the pro-
tective cover.
… 61 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkga-40-li-a1---ian-313870

Reset search

  • Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 40-Li A1 - IAN 313870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info