779750

Parkside PISG 120 A2 - IAN 331996 Manual

36
Zoom out
Zoom in
Previous page
1/137
Next page
36 GB/IE
of the standard, arc welding
devices can still result in electro-
magnetic interferences in sensitive
systems and devices.
The operator
is responsible for malfunctions
that occur through the arc while
welding and must take suitable
protective measures. In doing so,
the operator must consider the
following:
– network, control, signal and
telecommunication lines
– computers and other micro-
processor-controlled devices
– TVs, radios and other playback
devices
– electronic and electrical safety
equipment
– people with cardiac pace-
makers or hearing aids
– measurement and calibration
devices
– interference immunity of other
equipment nearby
– the time at which the welding
work is carried out.
The following is recommended
to reduce possible interference
radiation:
– equip the mains connection
with a mains filter
– the welding device must be
regularly maintained and kept
in a good condition
– welding cables should be
completely uncoiled and run as
close to parallel with the floor
as possible
– devices and systems that are
compromised by the inter-
ference radiation must be
removed from the welding area
or shielded.
zBefore use
Take the device and accessories out
of the packaging and check them for
damage (e.g. transport damage).
Fix the carrying strap
1
onto the
device (see Fig. C1–C4).
Connect the electrode holder
5
and
the earth terminal
4
to the welding
device.
Position an electrode in the clamps
of the electrode holder.
zFit welding mask
Fit the handle
8
onto the welding
mask
7
, as shown in Fig. A.
Fit the protective glass
11
on to the
welding mask
7
, as shown in
Fig.A.
The protective glass
10
must be
pushed in from the top.
Note: If you are not able to push the
protective glass
10
in fully, gently press
on the outside of the protective glass
10
.
zUsing the device
Note: The welding device is designed
for welding with electrodes.
Use the electrode holder clamps
without protruding bracket screws,
which meet the current safety
standards.
Safety instructions / Before use / Fit welding mask / Using the device
331996_Inverter_Schweissgeraet_PISG_120_A2_content_LB8.indb 36331996_Inverter_Schweissgeraet_PISG_120_A2_content_LB8.indb 36 17.12.2019 14:19:0817.12.2019 14:19:08
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PISG 120 A2 - IAN 331996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PISG 120 A2 - IAN 331996 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info