722810

Parkside PHSA 20-Li A1 - IAN 331370-1907 Manual

29
Zoom out
Zoom in
Previous page
1/122
Next page
GB IE
29
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush. Do not
use cleaning agents or solvents. You
may otherwise irreparably damage the
appliance.
• Always keep the equipment clean. After
using the equipment, it is imperative to:
- Clean the blade (with an oily cloth);
- Oil the blade
shaft with an oil
can or spray.
Maintenance
• Prior to every use, check the appliance
for obvious defects such as loose, worn or
damaged parts. Check that the screws in
the safety knife bar ( 2) are tight.
• Check covers and safety devices (see
) for damages and correct installa-
tion. Replace as necessary.
• You can smoothen minor nudges in the
cutting teeth yourself using a knife grinder
to sharpen the cutting edges. The trimmer
will only cut well if the teeth are sharp.
• Blunt, bent or damaged knife bars to
be replaced.
Ask our service centre to carry out any
work that is not described in these instruc-
tions. Use only original parts.
Storage
Keep the device in the blade guard (
14)
supplied, dry and out of reach of children.
Wall bracket
Suspension device on the underside
of the device (12a)
• Using dowels, place one screw at the
desired position on a wall.
• The screw head can have a diameter
of 6 - 8 mm.
• Leave the screw head protruding at a
distance of approx. 10 mm from the
wall.
• You can place the device onto the
screw using the openings on the blade
and pull the device down until it stops.
Suspension device on the blade
guard (12b)
• Using dowels, place two screws
17mm apart at the desired position on
a wall.
• The screw head can have a diameter
of 4 - 5 mm.
• Leave the screw heads protruding at a
distance of approx. 10 mm from the wall.
• You can place the device onto the
two screws using the openings on the
blade and pull the device down until it
stops
The retention inside the blade
guard prevents oil from dripping
down onto the safety cutter bar and
soiling the oor or wall. Residual oil
collects in the blade guard and can
be poured out into a residual oil
container.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to nd these or consult an in-
stallation plan for guidance.
… 29 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-phsa-20-li-a1---ian-331370-1907

Reset search

  • How much for battery and charger for cordless hedge trimmer PHSA 20-Li A1 Submitted on 28-6-2020 at 13:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHSA 20-Li A1 - IAN 331370-1907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSA 20-Li A1 - IAN 331370-1907 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info