722810
27
Zoom out
Zoom in
Previous page
1/122
Next page
GB IE
27
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Operating
Wear suitable clothing and
work gloves when working
with the equipment.
Wear eye and ear protection.
Ensure that the equipment is
functional before each use.
The On/Off switch and the
safety switch must not be
held closed. They must switch
off the motor when on is re-
leased. Should a switch be
damaged, stop working with
the equipment. Ensure that the
mains voltage value matches
the label on the equipment.
Reduce the risk of injuries and
accidents by wearing person-
al protection equipment and
ensuring that the unit is fully
functional.
Note noise protection and local
specications.
Removing/inserting the
battery
1. To remove the battery from the device,
press the release button (13) on the
battery (9) and pull the battery out.
2. To insert the battery (9), place it on the
guide track (14) and push it back into
the appliance. It will audibly snap in.
Do not insert the battery until
the appliance is fully assem-
bled. Risk of injury!
Switching On and Off
Ensure that you are standing in a
rm position with both hands grip-
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
Removing the blade guard:
1. Press the blade guard (
11) at the
points marked and remove
it.
Turning on:
2. Check that the battery (9) is in (see “Re-
moving/inserting the battery”).
3. Press the safety switch (4) at the front
handle (5).
4. Press the On/Off switch (7). The hedge
trimmer will run at top speed.
Turning off:
5. Release the safety switch (4) or the
On/Off switch s (7).
Setting the rear handle
The rear handle (8) can be placed into
three different positions (-90°, 0° and 90°).
1. Slide the release button (15) back-
wards.
2. Rotate the rear handle (8) into the de-
sired position.
3. Let go of the release button (15). The
rear handle (8) will latch into position.
27


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-phsa-20-li-a1---ian-331370-1907

Reset search

  • How much for battery and charger for cordless hedge trimmer PHSA 20-Li A1 Submitted on 28-6-2020 at 13:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHSA 20-Li A1 - IAN 331370-1907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSA 20-Li A1 - IAN 331370-1907 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info