679445
25
Zoom out
Zoom in
Previous page
1/34
Next page
PHP 500 D2
22 
GB
MT
Gluing:
Pull the trigger
to control the flow of glue in
accordance with your requirements.
Apply the glue in spots. For flexible materials,
such as textiles, apply the glue in zigzag lines.
Press the two workpieces to be bonded together
immediately after applying the glue and hold
for about 30 seconds. The glued bond is ready
after about 5 minutes.
During breaks in work, put the glue gun down
on the plastic stand
or replace it in the
charger .
Remove any glue residue after it has cooled
down with a sharp knife. Bonded joints can be
released by heating.
Switching the appliance off:
Unplug the appliance from the mains socket.
Changing the nozzles:
The temperature of the nozzle
reach a
temperature of around 200°C.
Wear protective gloves.
Heat the appliance up for about 5 minutes.
Replace the nozzle
when hot.
Risk of burns! Touch the nozzle
only by the
thermal protection . The nozzle tip is hot!
NOTE
Hold the appliance vertically with the nozzle
pointing upwards, otherwise the glue could
drip out.
Maintenance and cleaning
WARNING! ALWAYS REMOVE THE
POWER PLUG FROM THE POWER
SOCKET BEFORE CLEANING THE
APPLIANCE.
The glue gun is maintenance free.
Keep the appliance clean and dry at all times.
Never permit liquids to enter inside the
appliance. Use a cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
Disposal
The packaging is made from environmen-
tally friendly material and can be
disposed of at your local recycling plant.
Do not dispose of electrical ap-
pliances with normal domestic waste!
As required by European Guideline 2012/19/EU,
worn-out electrical appliances must be collected
separately and fed into an environmentally compa-
tible recycling process.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
200
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHP 500 D2 - IAN 304706 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHP 500 D2 - IAN 304706 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHP 500 D2 - IAN 304706

Parkside PHP 500 D2 - IAN 304706 User Manual - German, Dutch, Danish, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info