Manual Parkside PHKSAP 20-Li A1 - IAN 289755 (page 24 of 114) (English, German, Dutch, French, Portuguese, Spanish)

722854

Zoom out

Zoom in

1/114

26 GB / IE

Power tool use and care

1. Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will do

the job better and safer at the rate for which it

was designed.

2. Do not use the power tool if the

switch does not turn it on and oﬀ. Any

power tool that cannot be controlled with the

switch is dangerous and must be repaired.

3. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

4. Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool. Power tools are

dangerous in the hands of untrained users.

5. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may aﬀect the

power tool’s operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

7. Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions and

the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger

speciﬁed by the manufacturer. A

charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with

another battery pack.

2. Use power tools only with

speciﬁcally designated battery

packs. Use of any other battery packs may

create a risk of injury and ﬁre.

3. When battery pack is not in use,

keep it away from other metal

objects, like paper clips, coins, keys,

nails, screws or other small metal

objects, that can make a connection

from one terminal to another. Shorting

the battery terminals together may cause

burns or a ﬁre.

4. Under abusive conditions, liquid

may be ejected from the battery;

avoid contact. If contact accidentally

occurs, ﬂush with water. If liquid

contacts eyes, additionally seek

medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

1. Have your power tool serviced by

a qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

Q Circular saw warnings

Safety instructions for all saws – Cutting

procedures

1. DANGER! Keep hands away from

cutting area and the blade. Keep

your second hand on auxiliary

handle, or motor housing. If both hands

are holding the saw, they cannot be cut by

the blade.

2. Do not reach underneath the

workpiece. The guard cannot protect you

from the blade below the workpiece.

3. Adjust the cutting depth to the

thickness of the workpiece. Less than a

full tooth of the blade teeth should be visible

below the workpiece.

4. Never hold piece being cut in your

hands or across your leg. Secure the

workpiece to a stable platform. It is

important to support the work properly to

minimise body exposure, blade binding, or

loss of control.

5. Hold the power tool by insulated

gripping surfaces only, when

performing an operation where

the cutting tool may contact hidden

wiring. Contact with a “live” wire will also

make exposed metal parts of the power tool

“live” and could give the operator an electric

shock.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSAP 20-Li A1 - IAN 289755 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHKSAP 20-Li A1 - IAN 289755 Manual

Product: