722854
22
Zoom out
Zoom in
Previous page
1/114
Next page
24 GB / IE
Figure C:
21
Battery level indication light
22
Release button
23
Battery level button
24
Rapid battery charger
25
Charging status LED – Green
26
Charging status LED – Red
Q Scope of delivery
1 Cordless circular saw 20 V PHKSAP 20-Li A1
1 Battery pack PHKSAP 20-Li A1-1
1 Rapid battery charger PHKSAP 20-Li A1-2
1 Rip fence
1 Hex key
1 Instruction manual
Q Technical data
Cordless circular saw: PHKSAP 20-Li A1
Rated voltage: 20 V
No load speed n
0
: 4500 min
-1
Saw blade diameter: 190 mm
Arbour diameter: 20 mm
Max. cutting depth: 90°: 62 mm
45°: 45 mm
Battery pack: PHKSAP 20-Li A1-1
Type: Lithium ion
Rated voltage: 20 V
max.
Capacity: 5 Ah
Number of cells: 10
Rapid battery charger: PHKSAP 20-Li A1-2
INPUT:
Rated voltage and
frequency:
100 – 240 V
,
50 – 60 Hz
Power consumption: 95 W
OUTPUT:
Rated voltage: 14.4 – 20 V
Charging current: 4 A
Charging time: approx. 90 min
Protection class:
II /
Noise emission value:
Noise measurement value determined in
accordance with EN 60745. The A-rated noise
level of the product is typically as follows:
Sound pressure level L
pA
: 89.4 dB(A)
Uncertainty K
pA
: 3 dB
Sound power level L
WA
: 100.4 dB(A)
Uncertainty K
WA
: 3 dB
Vibration emission value:
Total vibration values (vector total of three directions)
determined in accordance with EN 60745:
Cutting wood
(main handle)
Hand/arm vibration a
h,W
: 3.65 m/s
2
(auxiliary handle)
Hand/arm vibration a
h,W
: 2.97 m/s
2
Uncertainty K 1.5 m/s
2
WARNING!
u The vibration level varies in accordance
with the use of the power tool and may
be higher than the value specified in these
instructions in some cases. There is a risk of
underestimation of the vibration load if the
power tool is used regularly in this manner.
Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the
power tool is switched on but running without
load).
NOTE
u The vibration level specified in these
instructions has been measured in
accordance with a standardised measuring
procedure specified in EN 60745 and can
be used to make equipment comparisons.
The specified vibration emission value can
also be used to make an initial exposure
estimate.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKSAP 20-Li A1 - IAN 289755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSAP 20-Li A1 - IAN 289755 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info