679113
12
Zoom out
Zoom in
Previous page
1/50
Next page
PHKSA 12 A1
GB
IE
NI
CY
 9
4. Undo the tensioning screw using a hex key .
5. Now, remove the tensioning screw
and the
clamping flange (see also fig. A).
Fig. A: Changing the saw blade
6. Pull the blade guard
all the way back using
the release lever
and keep the blade guard
in this position.
7. Remove the saw blade
carefully out of the
appliance from below.
5. Fitting a saw blade
is done in the reverse
order.
6. Press the spindle lock button
(until it engages)
and use the hex key to tighten the clamping
screw .
WARNING!
The arrow on the saw blade
must corre-
spond to the arrow showing the direction of
rotation (running direction shown on the
blade guard ).
Ensure that the saw blade
is suitable for the
rotational speed of the tool.
Rip fence
Undo the wing screw for the rip fence and
place the rip fence in the rip fence slot .
Set the desired cut width
using the scale on the rip fence and the cut
out in the base plate
(see also fig. B).
The right recess in the base plate is for a cutting
angle of 0°. The left recess in the base plate is
for a cutting angle of 45°.
Fig. B: Cutting width 2 cm
Retighten the wing screw for the rip fence .
Connecting a dust extraction unit
Attach the adapter for dust extraction to the
chip ejector
.
Optional depending on the diameter of the dust
and sawdust extraction.
Connect an approved dust and chip extraction
device.
NOTE
When sawing wood or other materials that
create dusts that are hazardous to health,
always connect the appliance to a suitable,
certified suction appliance.
Use
Switching on and off
Switching on:
Push the safety lock-out to the left or right
and keep it pressed.
Press the ON/OFF switch . The LED work
light lights up. Once the saw is running, you
can release the safety lock-out .
Switching off:
Release the ON/OFF switch
.
Battery charge level
The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Overload warning
If the appliance is in danger of overloading,
the overload warning
lights up briefly. The
appliance switches off.
IB_302329_PHKSA12A1_LB6-.indb 9 29.03.18 13:44
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKSA 12 A1 - IAN 302329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 A1 - IAN 302329 in the language / languages: English as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHKSA 12 A1 - IAN 302329

Parkside PHKSA 12 A1 - IAN 302329 User Manual - German, Dutch, Danish, French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info