679113
11
Zoom out
Zoom in
Previous page
1/50
Next page
PHKSA 12 A1
8 
GB
IE
NI
CY
Do not allow the teeth of the saw blade to
overheat.
When sawing plastic, avoid melting the plastic.
Wear a dust mask when sawing.
Only use recommended saw blades.
Always wear hearing protection!
Safety information for circular saw
blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
Before use
Removing/charging/inserting the
battery pack
CAUTION!
Always unplug the appliance before you
remove the battery pack
from or connect
the battery pack to the charger.
NOTE
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
If the battery overheats during operation, it
cannot be charged immediately. Allow it to
cool down first.
Never charge the battery pack
if the
ambient temperature is below 10°C or above
40°C.
1. To remove the battery pack
, press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack
into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED
lights up red.
4. The green charge status indicator LED
indicates
that the charging process is complete and the
battery pack is ready.
5. Insert the battery pack
back into the appliance.
Checking blade guard functionality
Pull the release lever for the blade guard as
far as it will go.
The blade guard
should move without jamming.
When letting go of the release lever for the blade
guard , it should automatically jump back to its
original position.
Operation
Fitting/changing the saw blade
Always remove the battery pack before changing
the saw blade !
1. Set the cutting depth (using the locking screw
)
to the minimum position, 0 mm.
2. Swing the blade guard
back using the
release lever and put the appliance down.
3. Press the spindle lock button
(until it engag-
es) and hold it in.
IB_302329_PHKSA12A1_LB6-.indb 8 29.03.18 13:44
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKSA 12 A1 - IAN 302329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKSA 12 A1 - IAN 302329 in the language / languages: English as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHKSA 12 A1 - IAN 302329

Parkside PHKSA 12 A1 - IAN 302329 User Manual - German, Dutch, Danish, French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info