779309

Parkside PHKS 1350 C2 - IAN 339963 Manual

28
Zoom out
Zoom in
Previous page
1/104
Next page
GB│IE │ 25 ■
PHKS 1350 C2
Switching the laser on and off
Switching on
♦ Press the ON/OFF switch laser .
Switching off
♦ Press the ON/OFF switch laser .
NOTE
► If the batteries are spent, replace them with
two new 1.5 V alkaline button cells (type
AG 13/LR 44, e.g. GPA 76) .
Set rotational speed
■ Turn the adjusting wheel to the desired
rotational speed (arrow marking ▲)
(1 = lowest rotational speed/
6 = highest rotational speed):
Use the following suggested settings or set the
rotational speed on the adjusting wheel as
required.
Material Rotational
speed
setting
Cross cuts & longitudinal cuts in
hard and soft wood (solid wood) 6
Chipboard, fibre board 6
Core board, plywood 6
Coated and veneered boards 6
PVC sheets 3 – 5
Acrylic glass sheets, perspex 2 – 4
Aluminium plate 4 – 6
Aluminium profile 4 – 6
Plaster board 1 – 2
Stone wool board 1 – 2
Cement-bonded particle board 1 – 2
Tips and tricks
■ Avoid damaging the cutting edge of sensitive
materials, e.g. coated chipboards or doors, by
sticking masking tape along the cutting line.
Another benefit of this is that it is easier to mark
a line on the tape than on a shiny surface. An
even more effective method of protecting the
cutting edges is to clamp a thin piece of wood
along the cutting line (this wood is also sawn).
Maintenance and Cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ To clean the casing, use a soft dry cloth.
■ The blade guard must always move freely and
close automatically. Therefore, keep the area
around the blade guard clean at all times.
Remove dust and chips by blowing them out
with compressed air or with a brush.
WARNING!
■ If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or his representative in order to avoid safety
hazards.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKS 1350 C2 - IAN 339963 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKS 1350 C2 - IAN 339963 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info