779309
26
Zoom out
Zoom in
Previous page
1/104
Next page
GBIE 23
PHKS 1350 C2
Changing the batteries
Open the cover of the battery compartment
with a suitable Philips screwdriver.
Remove the spent batteries.
Insert two new 1.5 V alkaline button cells (type
AG 13/LR 44, e.g. GPA 76) observing the
correct polarity and screw the battery compart-
ment cover firmly closed.
CAUTION!
If operating and adjustment equipment is
used or procedures other than those specified
here are carried out, this may result in
hazardous radiation exposure.
Original accessories/additional
equipment
Only use the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
appliance.
Before use
Check that the blade guard is
functioning correctly
WARNING! RISK OF INJURY!
Switch off the appliance and pull out the
power plug before starting any work on
the appliance.
Make sure that all moving parts of the blade
guard move freely without jamming and all
devices designed to cover the saw blade are
working correctly.
Activate the blade guard only using the
release lever for the blade guard .
Pull the release lever for the blade guard
all the way back.
When you let go of the release lever for the
blade guard , the blade guard must
move freely back to its starting position.
Initial operation
The PHKS 1350 C2 circular saw has Intelligent
Power Control. This automatic power delivery
system ensures that for a particular speed range
the power output remains constant when working
on harder and more resistant materials.
Fitting/changing the saw blade
NOTE
All blades used should conform to EN 847-1.
Use only saw blade with diameters
corresponding to the label on the saw.
Always pull out the plug from the mains before
changing the saw blade !
1. Set the cutting depth (using the locking
screw ) to the minimum position, 0 mm.
2. Swing the blade guard back using the
release lever and put the device down.
3. Press the spindle lock button (until it engages)
and use the Allen key to release the
clamping screw/washer . Now remover the
clamping screw/washer and the clamping
flange (see also Fig. A).
Fig. A: Changing the saw blade
4. Remove saw blade .
5. Fitting a saw blade is carried out in the
reverse order.
6. Press the spindle lock button (until it
engages) and use the Allen key to tighten
the clamping screw/washer .
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKS 1350 C2 - IAN 339963 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKS 1350 C2 - IAN 339963 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info