762962
31
Zoom out
Zoom in
Previous page
1/128
Next page
25GB/IE
6.5 Use
m WARNING
With gas or oil-fired machines it is important that sufficient
ventilation is provided and that the exhaust gases are
properly extracted.
m DANGER
The operator must use the appliance properly. They must
take local conditions into account and pay attention to oth-
ers, especially children, when working with the appliance.
This appliance may never be left unattended while it is in
operation.
The appliance may only be used by people who have
been instructed in its use or whose ability to operate it
has been demonstrated and who are expressly tasked
with its use. This appliance may not be used by minors or
untrained persons.
Always use suitable gloves when working on the appli-
ance.
The water jet being ejected from the jet pipe creates a
recoil force. The angled jet pipe causes the force to be
exerted upwards. Hold the gun and the jet pipe firmly.
Using angled spray equipment can help to reduce recoil
and twisting forces.
m WARNING
The use of high-pressure cleaners can lead to the forma-
tion of aerosols. Inhalation of aerosols can be hazardous
to health. Grade FFP2 filter masks (or higher) are suitable
for protection from water-based aerosols.
6.6 Transport
m DANGER
When transporting the device, the engine must be
stopped, the spark plug connector removed and the de-
vice securely fastened.
6.7 Maintenance
m DANGER
Switch off the appliance before carrying out any cleaning
or maintenance work or when exchanging components.
Before all work on the appliance and accessories, depres-
surise the high-pressure system.
The spark plug connector must be removed.
Corrective maintenance may only be carried out by ap-
proved customer service centres or specialists in this area
who are familiar with all the relevant safety regulations.
6.8 Accessories and spare parts
m DANGER
To prevent hazards, repairs and the installation of replace-
ment parts may only be carried out by authorised custom-
er service centres.
Use only spare parts that have been approved by the
manufacturer. Original spare parts and accessories offer
a better guarantee that the appliance can be operated
safely and reliably.
6.9 High-temperature water and petrol engine ap-
pliances
m DANGER
Use only the fuel specified in the operating instructions.
The use of non-approved fuels increases the risk of explo-
sion.
When refuelling petrol engine devices, take care not to get
any fuel on the hot surfaces.
Always observe the special safety instructions for petrol
engine appliances contained in the operating instructions!
When operating the appliance in interior rooms, sufficient
ventilation and exhaust gas extraction must be ensured
(risk of poisoning).
The exhaust opening must not be blocked.
m WARNING
Risk of burns! Do not bend over or touch the exhaust outlet.
6.10 Handling fuel
m DANGER
Do not operate the high-pressure cleaner if fuel has been
spilt. Move the appliance to another location and avoid
all spark generation.
Do not store, spill or use fuel in the vicinity of open flames
or appliances such as ovens, boilers, water heaters, etc.
that have a pilot flame or could generate sparks.
Keep easily inflammable objects and substances away
from the exhaust silencer (at least 2 m).
Do not operate the engine without the exhaust silencer
and check and clean this regularly (replace if necessary).
Do not use the engine in wooded, bushy or grassy terrain
unless the exhaust pipe is fitted with a spark arrestor.
Except during adjustment work, do not run the engine
without an attached air filter or without the cover over the
intake manifold.
Do not make any adjustments to the regulator springs, control-
ler rods or other parts that could increase the engine speed.
Risk of burns! Do not touch the hot exhaust silencer, cylin-
der or cooling fins.
Keep your hands and feet away from all moving or rotat-
ing parts.
Risk of poisoning! Do not operate the appliance in con-
fined spaces.
Do not use any unsuitable fuels as these can be dangerous.
6.11 Safety devices
The safety devices are designed to protect the user and may
not be deactivated or repurposed.
6.11.1 Relief valve
If the hand spray gun is closed, the relief valve opens and
the high-pressure pump routes the water back to the pump
suction side. This prevents the permissible working pressure
from being exceeded.
The relief valve is set and sealed at the factory. It may only
be adjusted by the customer service.
6.11.2 Thermal valve
The thermal valve protects the high-pressure pump from
impermissible warming in circulation operation if the hand
spray gun is closed.
The thermal valve opens if the water temperature exceeds
55 - 60°C and drains the hot water.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHDB 4 C3 - IAN 327193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDB 4 C3 - IAN 327193 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info