Manual Parkside PHD 150 E4 - IAN 280206 (page 8 of 74) (English, German, Dutch, Danish, French)

655516

8

Zoom out

Zoom in

Previous page

1/74

Next page

8

GB IE NI

Electrical safety:

Caution: to avoid accidents

and injuries from electric

shocks:

• The plug and socket of an extension

cable must be water-tight!

Unsuitable extension cables can

be dangerous as people can be

harmed by an electric shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of ooding, x the

plug connections in an area that is safe

from ooding.

• Ensure that the mains voltage matches

the specications on the rating plate.

• Connection to the mains must be

carried out by an experienced electri-

cian and meet the requirements of

IEC60364-1.

• The electrical installation shall be ac-

cording to national wiring rules.

• The device must only be connected to

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30 mA.

Fuse: at least 13 ampere.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or x the equipment by

the cable.

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

• Do not spray combustible liquids. Risk

of explosion.

• If you come into contact with cleaning

agents, rinse with plenty of clean wa-

ter.

• Store the equipment in a dry place and

out of reach of children.

Caution! To avoid damage to

the equipment and any pos-

sible person injury resulting

from this:

• Do not work with damaged or incom-

plete equipment, or with equipment

that has been converted without the

approval of the manufacturer. Before

initial operation, have a specialist

check that the required electrical pro-

tection measures are in place.

• Do not operate the equipment if the

mains cable, water supply or other im-

portant parts such as the high-pressure

hose or gun are damaged/leaking.

• Protect the pressure cleaner from frost

and dry running.

• High-pressure hoses, ttings and

couplings are important for machine

safety. Use only high-pressure hoses,

ttings and couplings recommended by

the manufacturer.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an authorised electrician.

In the case of repairs, always contact

our service centre.

1

Hi.
When I connect my pressure washer it will start and then stop. When I remove the unit from the lance water will be pumped through the lance but once you attach a spray gun it stops. Submitted on 11-5-2021 at 19:54
Reply Report abuse
Onko phd 150 e4 saatavana moottoria joka on tosi hiekko? Submitted on 30-9-2020 at 06:54
Reply Report abuse
Part no
2»pa66 +30gf« how do you remove off part 2 lance (lance has a yellow part to it)I need to get to nozzle Submitted on 6-4-2018 at 19:16
Reply Report abuse
unable to draw water into my parkside phd 150 e 4 pressure washer Submitted on 12-11-2017 at 15:42
Reply Report abuse
does the PHD 150 E4 contain a suction pump ie for connecting it to a water butt Submitted on 18-10-2017 at 15:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Parkside PHD 150 E4 - IAN 280206 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 150 E4 - IAN 280206 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info