762957

Parkside PHD 110 D1 - IAN 340474 Manual

11
Zoom out
Zoom in
Previous page
1/50
Next page
GB CY
11
Ending operation
1. Release the switch lever (20) of the
spray gun (13).
2. Turn the pressure washer off using the
on/off switch (3).
3. Turn off the tap.
4. Press the switch lever of the spray gun
(13) to release the existing pressure in
the system.
5. Remove the mains plug.
6. Wind the mains connection cable (7)
around the retaining bracket for the
mains connection cable.
7. Disconnect the pressure washer from
the water supply.
Cleaning and
Maintenance
Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.
Cleaning
Never direct the water jet
against the washer, nor clean
the washer under fl owing
water. This could give rise to
the danger of electric shock
and damage the washer! .
Always keep the washer clean. Do
not use any detergents or solvents.
• Always keep the ventilation slots clean
and free.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
• If the fl at spray nozzle (11) is blocked,
you can remove any foreign bodies in
the nozzle using the nozzle cleaning
needle (14).
• Occasionally clean the fi lter insert un-
der running water.
Maintenance
The pressure washer is maintenance free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Storage
• Drain all the water from the pressure
washer. Disconnect the unit from the
water supply. Press the On/Off switch
(3) to turn on the pressure washer for
no longer than 1 minute until no more
water escapes from the high-pressure
connection (9). Turn off the unit.
• Wind the mains connection cable (7)
around the retaining bracket for the
mains connection cable (2).
• Store the fl at spray nozzle (11) in the
holder for the fl at spray nozzle (6).
• Protect the pressure washer and its ac-
cessories from frost when they have not
been completely drained of all water.
• Store the pressure washer and its ac-
cessories in a frost-free room.
• To transport or put away the equip-
ment, use only the carrying handle.
• Ensure that the device is stored in an
upright position so that it is protected
against any damage.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have fi nished with
them.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 110 D1 - IAN 340474 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 110 D1 - IAN 340474 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 110 D1 - IAN 340474

Parkside PHD 110 D1 - IAN 340474 User Manual - English, German, Dutch, French, Polish - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info