762957

Parkside PHD 110 D1 - IAN 340474 Manual

10
Zoom out
Zoom in
Previous page
1/50
Next page
GB CY
10
• Ensure that the pressure washer is turned
off by its ON/OFF switch (3).
• Insert the mains plug into the mains socket
Operation
• Connect the equipment to the water tap.
Observe the regulations for the use of a
system separator.
• Turn on the water tap entirely.
Never operate the pressure washer
with a closed water tap. Dry run-
ning will damage the washer!
Be prepared for the recoil
force of the emitted water jet!
Ensure that you are stand-
ing fi rmly and that you are
holding the gun (13) securely,
otherwise you could injure
yourself or other people.
• Switch on the pressure washer with the
ON/OFF switch (3).
• Pull the lever ( 20) of the gun (13) to
turn on the washer.
Releasing the lever will switch off
the washer, but the pressure within
the system is retained.
• You can lock the switch lever
(20) of the spray gun (13) with
the locking button (21).
Lock the switch-on lever to prevent
the pressure washer from being in-
advertently/accidentally started.
In case of leaks in the water
system, immediately switch
off the equipment at the on/
off switch (3) and disconnect
the mains cable (7) of the
equipment from the mains.
There is a risk of electric
shock. Start restoring the wa-
ter connections (see “Initial
Operation – Setting up”).
If there is still air in the equipment,
please proceed as follows:
Bleed the supply hose:
1. Remove the quick connector of the
supply hose from the water connection
coupling (5) and the water connection
with fi lter insert (4).
2. Turn on the tap until the water comes
out without bubbles.
3. Turn off the tap.
4. Connect the quick connector of the
supply hose to the water connection
coupling (5) and the water connection
with fi lter insert (4) on the device.
5. Turn on the tap fully.
Bleed the equipment:
6. Switch on the equipment at the on/off
switch (3) until the pressure has built
up.
7. Switch off the equipment at the on/off
switch (3).
8. Depress the start lever ( 20) on the
spray gun (13) until the pressure is re-
leased.
9. Please repeat steps 6. to 8. several
times until there is no further air in the
equipment.
Interrupting operation
• Release the lever (20) of the gun (13).
• During prolonged work intervals turn
off the washer by its ON / OFF switch
(3).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 110 D1 - IAN 340474 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 110 D1 - IAN 340474 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 110 D1 - IAN 340474

Parkside PHD 110 D1 - IAN 340474 User Manual - English, German, Dutch, French, Polish - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info