762954
11
Zoom out
Zoom in
Previous page
1/52
Next page
11
CYNIIEGB
D
Lock / unlock the switch-on lever
of the gun (4) by depressing the
locking lever (19).
Lock the switch-on lever to prevent
the pressure washer from being in-
advertently/accidentally started.
Locked
Open
In case of leaks in the water
system, immediately switch
off the equipment at the on/
off switch (17) and discon-
nect the mains cable (8)
of the equipment from the
mains. There is a risk of elec-
tric shock. Start restoring the
water connections (see “Ini-
tial Operation – Setting up”).
If there is still air in the equipment,
please proceed as follows:
Bleed the supply hose:
1. Remove the quick connection for the
garden hose adapter on the water con-
nection (10) and open the water tap
until water with no bubbles emerges.
2. Close the water tap.
3. Connect the supply hose to the equip-
ment with the aid of the quick connec-
tion for the garden hose adapter (10).
4. Fully open the water tap.
Bleed the equipment:
5. Switch on the equipment at the on/off
switch (17) until the pressure has built
up.
6. Switch off the equipment at the on/off
switch (17).
7. Depress the start lever on the spray
gun (10) until the pressure is released.
8. Please repeat steps 5. to 7. several
times until there is no further air in the
equipment.
Interrupting operation
Release the lever of the gun (
A
4).
During prolonged work intervals turn
off the washer by its ON / OFF switch
(
A
17).
Ending operation
After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
Release the lever of the gun (
A
4).
Turn off the pressure by its ON / OFF
switch (
A
17).
Turn off the water tap.
Pull the lever of the gun (
A
4) to vent
the pressure existing within the system.
Pull the mains plug and wind up the
mains cable.
Disconnect the pressure washer from
the water mains.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 110 A1 - IAN 285109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 110 A1 - IAN 285109 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 110 A1 - IAN 285109

Parkside PHD 110 A1 - IAN 285109 User Manual - German - 52 pages

Parkside PHD 110 A1 - IAN 285109 User Manual - Dutch, Danish - 52 pages

Parkside PHD 110 A1 - IAN 285109 User Manual - French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info