Manual Parkside PHD 110 A1 - IAN 285109 (page 9 of 52) (English)

762954

Zoom out

Zoom in

1/52

CYNIIEGB

• Ensure that the mains voltage

matches the specications on

the rating plate.

• The electrical installation shall

be according to national wiring

rules.

• Connection to the mains must

be carried out by an experi-

enced electrician and meet the

requirements of IEC60364-1.

• The device must only be con-

nected to a mains socket via a

residual-current circuit breaker

(RCD) with a rated leakage cur-

rent of not more than 30mA.

Fuse: at least 13 ampere.

• Before each use, check the

equipment, cable and plug for

damage.

• If the power cable for this

equipment is damaged, it must

be replaced by the manufac-

turer, a customer service agent

of the same or a similarly quali-

ed person in order to prevent

hazards.

• Do not pull the plug from the

socket by the cable. Protect the

cable from heat, oil and sharp

edges.

• Do not carry or x the equip-

ment by the cable.

• Use only extension cables that

are protected from spray water

and designed for outdoor use.

Always fully unroll a cable

drum before use. Check the ca-

ble for damage.

• Before any work on the equip-

ment, during work breaks and

in the case of non-use, remove

the plug from the socket.

• The cross-section of the power

supply cable must not be less

than 2x2,5mm².

• Wear sturdy footwear to protect

against electric shock.

Initial Operation

In keeping with current regulations

a pressure washer must never be

operated off the drinking water

mains supply without a controlla-

ble backow preventer. A suitable

backow preventer in conformity

with EN 12729 type BA must be

used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available

from specialist retailers.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

Setting up

• Slide the holder for the detergent

tank / mains cable (16) to the

into the receptor on the applian-

ce side.

• Slide the holders for the steel

tube (14) into the receptors on

the back side.

• Slide the holders for the steel

tube (9) into the receptors on the

back side.

• Slide the holder for the spray

gun (5) to the into the receptor

on the front side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 110 A1 - IAN 285109 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 110 A1 - IAN 285109

Parkside PHD 110 A1 - IAN 285109 User Manual - German - 52 pages

Parkside PHD 110 A1 - IAN 285109 User Manual - Dutch, Danish - 52 pages

Parkside PHD 110 A1 - IAN 285109 User Manual - French, Italian - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 110 A1 - IAN 285109 Manual

Product: