558717
7
Zoom out
Zoom in
Previous page
1/10
Next page
9 GB / IE
a particularly hard substrate. Redriving must be car-
ried out directly at each staple or nail. If you do not
lift the nose
R
when doing this then no further
staple or nail will be loaded into the driving position.
j Drive the required staple or nail and press the
nose piece
R
once more on to the next redriv-
ing position.
j Press the trigger
W
as often as necessary until
the staple or nail is flush with the substrate.
Examples of use:
j Fastening a covering to the seat of a chair
(see Fig. B).
j Fixing a skirting at the joint between the wall
and floor covering (see Fig. C).
j Stretching and stapling a canvas to a frame
(see Fig. D).
j Attaching a protective film to insulation material
when installing thermal insulation (see Fig. E).
j Attaching fixings for components in a wall
cladding system (see Fig. F).
L
Tool storage
j If you are not going to use the tool for a while
disconnect the mains lead
O
from the mains.
j Keep the tool safe from unauthorised use.
j Keep staples and nails in secure containers.
L Rectifying faults
m Attention!
J If you are going to rectify faults disconnect the
mains lead
O
from the mains.
Fault
Cause
Remedy
The tool does not work properly.
A staple or nail is blocking the tool.
Open the magazine slider
U
. This should re-
lease the pretension. Take off the front plate
E
with the hexagonal socket screw key
P
.
Remove the staple or nail.
A staple or nail has been incorrectly driven into
the material.
Remove the incorrectly driven staple or nail with
pincers or pointed pliers.
Select suitable staples or nails.
Set the required impact force that will correctly
drive the staples or nails.
The tool is defective.
Contact the service centre (see guarantee docu-
mentation).
L Maintenance and cleaning
m Attention!
J Before carrying out maintenance or cleaning
disconnect the mains lead
O
from the mains
supply.
The electric tacker is designed to be maintenance-free.
j Clean the tool frequently, ideally after each use
using a dry, fluff-free cloth. Never use water or
cleaning agent.
L Disposal
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical tools with
the household rubbish !
In accordance with European Directive 2002 / 96 / EC
about waste electrical and electronic equipment and
its transposition into national legislation, worn out
electric tools must be collected separately and taken
for environmentally compatible recycling.
Contact your local refuse disposal authority for more
details of how to dispose of your worn out electrical
tools.
Operation / Rectifying faults / Maintenance and cleaning / Disposal
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PET 23 - KH 3145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PET 23 - KH 3145 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PET 23 - KH 3145

Parkside PET 23 - KH 3145 User Manual - German, Dutch, French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info