558717
6
Zoom out
Zoom in
Previous page
1/10
Next page
8 GB / IE
J Protect your eyes. Wear protective glass-
es. This also applies to people who
may be helping with the work by supporting or
holding the workpiece.
J Before you start to use the tool, check that it is
in perfect condition.
J Make sure the tool is switched off before you
load the magazine
T
. To do this set the On / off
switch
I
to position “O”.
To work safely!
J Before undertaking any type of work with the tacker
make sure that materials and workpieces are safely
held in position. If necessary have a second per-
son on hand to support or hold the items steady.
J Protect the tool from moisture.
J Do not use the tool on moist or wet materials.
J If you have finished using the tool or are taking
a prolonged break from your work disconnect
the mains lead
O
from the mains.
L Operation
L Loading the magazine
Use only fine wire staples (type 53), narrow-backed
staples (type 55) or nails (type 47) !
j Press the magazine slider
U
in the direction of
the magazine
T
and guide it upwards.
j Pull the magazine slider
U
completely out of
the magazine
T
.
j If necessary remove any staples or nails of the
wrong type from the magazine
T
.
j Slide the correct staples or nails into the maga-
zine
T
.
j Look at the depiction on the magazine slider
U
for how to insert the staples or nails correctly.
j Push the magazine slider
U
into the magazine
T
until it meets the stop.
j Then press the magazine slider
U
downwards
until it has definitely engaged.
L
Setting the impact force
A tip!
j Select the lowest impact force required for stapling.
j You can set the impact force at any value be-
tween “1” (lowest impact force) and “7” (high-
est impact force) using the impact force
controller
Y
.
L
Switching on and off
m Attention!
J Connect the tool to the mains only when it is
switched off. To do this set the On / off switch
O
to position “O”.
To switch on
j Set the On / off switch
I
to position “1” (see Fig. A).
To switch off
j Set the On / off switch
I
to position “O”.
m Blow count:
The Electric Tacker PET 23 VARIO is designed for
30 blows per minute.
m Continuous Operating Time:
The Electric Tacker PET 23 VARIO is designed for
15 minutes of continuous operation at the maximum
blow count. Allow the appliance to cool down suffi-
ciently after such a tasking.
L
Stapling
j Switch on the tool.
j Press the nose
R
on the spot where you wish
to staple.
j Press the trigger
W
.
j Adjust the impact force to suit the materials,
staples or nails.
Redriving:
Use this function if you discover that some already-
driven staples or nails have not ended up flush in
Safety / Operation
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PET 23 - KH 3145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PET 23 - KH 3145 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PET 23 - KH 3145

Parkside PET 23 - KH 3145 User Manual - German, Dutch, French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info