679460
24
Zoom out
Zoom in
Previous page
1/87
Next page
PEH 30 C3
20 
GB
IE
NOTE
The planing blade may be factory-bonded
with protective lacquer. It is not necessary to
re-bond the blade.
Fit either a new or turned blade in the reverse
order. Make sure that the notch on the planing
blade slides into the tensioning plate groove
20a
(see fig. E).
Planing blades can be purchased exclusively
from the address given below (see section “Ser-
vice”). Do not use planing blades from other
manufacturers.
Replacing the drive belt (see fig. F)
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
Remove the screws and detach the drive
belt cover .
Remove the worn drive belt .
Fit the new drive belt onto the small belt
wheel first and then turn the drive belt
and pull it onto the large belt wheel .
Replace the drive belt cover and fix it in
place using the screws .
Maintenance and cleaning
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
Keep the appliance and the ventilation slits
clean to ensure fault-free operation.
Clean the chip ejector regularly.
To clean a blocked chip ejector, use a suitable
tool (e.g. a piece of wood, compressed air,
etc.).
Use a dry cloth to clean the housing.
Use a brush to remove any dust stuck to the
appliance.
Never use sharp objects, petrol, solvents or
cleansers which can damage plastic. Do not
allow any liquids to get into the interior of the
appliance.
NOTE
Spare parts which are not listed (e.g. carbon
brushes, planing blades) can be ordered
exclusively via our Service Hotline.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the ap-
pliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PEH 30 C3 - IAN 303564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PEH 30 C3 - IAN 303564 in the language / languages: Danish, French, Polish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PEH 30 C3 - IAN 303564

Parkside PEH 30 C3 - IAN 303564 User Manual - English - 39 pages

Parkside PEH 30 C3 - IAN 303564 User Manual - German, Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info