679460

Parkside PEH 30 C3 - IAN 303564 Manual

23
Zoom out
Zoom in
Previous page
1/87
Next page
PEH 30 C3
GB
│
IE 
│
 19 ■
♦ Push forward slowly and do not exert excessive
pressure on the plane sole . Excessive speed
reduces the surface finish and can lead to a jam
in the chip ejector.
Chamfering edges
The V grooves in the front plane sole allow
easy chamfering of workpiece edges.
♦ Use the V groove that corresponds to the chamfer
width required.
♦ Place the planer with the V groove onto the
workpiece edge and guide it forwards.
Using the rip fence
♦ To fit the rip fence, guide the connecting screw
8b
through the connecting piece
8a
and the rip
fence .
♦ Place the washer
8c
on the connecting screw
8b
.
♦ Screw the lock nut onto the connecting
screw
8b
.
♦ Fit the rip fence onto the appliance using the
fastening screw .
♦ Undo the lock nut and set the desired width.
♦ Retighten the lock nut .
♦ Ensure that the plane is applied with lateral
pressure.
Using the fold depth stop
♦ Fit the fold depth stop onto the appliance
using the fastening screw .
♦ Set the desired fold depth using the fold depth
stop .
♦ Repeat the planing process several times until
the required fold depth is achieved.
Removing/replacing the planing
blade (see figs. C - E)
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance.
CAUTION!
There is a risk of injury due to the cutting edges
of the planing blade
!
Never touch the planing blade on its cutting
edges.
The planing blade has two cutting edges and
can be turned.
♦ Replace the planing blade when both cutting
edges are blunt.
♦ Do not try to sharpen the planing blade .
Turn the planing blade
or replace it
WARNING! RISK OF INJURY
► Wear suitable protective gloves when changing
the planing blades.
NOTE
►
Do not undo the two hex socket screws.
These are used for adjusting the height of the
cutter block. No adjustment is required if you
use the planing blades sold by the manufac-
turer. Use only the planing knives supplied by
the manufacturer.
► When changing the blade, always replace
both blades to prevent an imbalance.
► Unscrew only one blade to start with. This will
allow you to use the factory-mounted second
blade for reference when reassembling later.
♦ Use the supplied open-ended spanner to
undo the 3 fastening screws
a little way so
that the planing blade can be moved
(see fig. C).
♦ Push the movable cutter block guard into the
slot in the housing.
♦ Push the planing blade sideways out of the
clamping element (see fig. D)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PEH 30 C3 - IAN 303564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PEH 30 C3 - IAN 303564 in the language / languages: Danish, French, Polish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PEH 30 C3 - IAN 303564

Parkside PEH 30 C3 - IAN 303564 User Manual - English - 39 pages

Parkside PEH 30 C3 - IAN 303564 User Manual - German, Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info