595413

Parkside PDSS 310 A1 - IAN 96878 Manual

10
Zoom out
Zoom in
Previous page
1/94
Next page
10 GB/IE
General safety instructions for air tools / Commissioning
General safety instructions for air tools
Risks associated with
accessories
Disconnect machine from the power supply be-
fore changing a tool or accessory.
Do not touch collets or accessories whilst impact
driving, as doing so may increase the risk of
cuts, burns or injuries from vibration.
Only use the size and types of accessories and
consumables recommended by the manufacturer
of the machine.
Only use impact sockets in good working con-
dition as manual sockets and accessories in
poor working condition may break and be
ejected when used with impact drivers.
Hazards in the work
environment
Slipping, tripping and falls are main causes of
injuries at the workplace. Be mindful of surfaces
which may have become slippery during ma-
chine use, and of tripping hazards caused by
the air- or hydraulic hose.
Proceed with caution in unfamiliar surroundings.
These may hold hidden dangers due to electri-
cal cables or supply lines.
The machine for screw connections is not suita-
ble for use in explosive environments and is not
insulated against contact with electrical power
sources.
Verify there are no electrical lines, gas lines,
etc. which may result in a hazard in the event
they are damaged during machine use.
Hazards due to dust
and vapours
Dusts and vapours generated by use of machines
for screw connections may result in damage to
the health (e.g. cancer, birth defects, asthma
and / or dermatitis); it is imperative to perform
a risk assessment for these hazards and imple-
ment the respective regulatory mechanisms.
The risk assessment should include dust genera-
ted from machine use and dust in the area pos-
sibly being blown around.
Exhaust air must be discharged so the amount
of dust being blown about in a dusty environ-
ment is minimised.
If dust or vapours are generated the principal
task must be to monitor them in the area where
they are released.
All machine mounting parts or accessories in-
tended to collect, extract or eliminate airborne
dust or vapours should be used and maintained
according to manufacturer instructions.
Use respiratory dust equipment as required by
labour- and health regulations.
Noise hazards
With inadequate ear protectors the impact of
high noise levels may result in permanent hea-
ring damage, hearing loss and other problems,
e.g. tinnitus (ringing, whistling or buzzing in the
ear).
It‘s imperative to perform a risk assessment for
these hazards and implement the suitable regu-
latory mechanisms.
Suitable regulatory mechanisms to minimise the
risk include measures such as using insulation
to prevent pinging sounds on work pieces.
Use heating protection as required by labour-
and health regulations.
The machine for screw connections must be
operated and maintained as recommended in
these instructions to prevent an unnecessary in-
crease in the noise level.
If the machine for screw connections features
a silencer, always ensure it is available when
using the machine for screw connections and in
good working order.
Select, maintain and replace consumables and
machine tools as recommended in these instruc-
tions to prevent an unnecessary increase in the
sound level.
96878_par_Druckluft-Schlagschrauber PDSS 310 A1_content_GB_IE_FI_SE_DK_BE.indd 10 23.04.14 15:54
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSS 310 A1 - IAN 96878 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSS 310 A1 - IAN 96878 in the language / languages: Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDSS 310 A1 - IAN 96878

Parkside PDSS 310 A1 - IAN 96878 User Manual - English, German, Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info