Manual Parkside PDS 120 B2 - IAN 322849 (page 9 of 60) (English, German, Dutch, French)

779497

Zoom out

Zoom in

1/60

4GB/IE/NI

The equipment may only be used for the tasks it is designed to

handle. Any other use is deemed to be a case of misuse. The

user/operator and not the manufacturer will be liable for any

damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use

in commercial, trade or industrial applications. Our warranty

will be voided if the equipment is used in commercial, trade or

industrial businesses or for equivalent purposes.

• The equipment is to be operated only with suitable saw

blades.

• To use the equipment properly you must also observe the

safety information, the assembly instructions and the operat-

ing instructions to be found in this manual.

• All persons who use and service the equipment have to be

acquainted with these operating instructions and must be in-

formed about the equipment’s potential hazards.

• It is also imperative to observe the accident prevention regu-

lations in force in your area.

• The same applies for the general rules of health and safety

at work.

• The manufacturer will not be liable for any changes made

to the equipment nor for any damage resulting from such

changes.

Residual risks

Even if you use this electric power tool in accord-

ance to instructions, certain residual risks cannot

be eliminated. The following hazards may arise in

connection with the equipment’s construction and

layout:

• Lung damage if no suitable protective dust mask is applied

• Damage to hearing if no suitable ear protection is applied

• Contact with the blade in the uncovered cutting zone

• Injuries (cuts) when changing the blade

• Crushed ﬁngers

• Kickback

• Tilting of the workpiece due to inadequate support

• Touching the blade

• Catapulting of pieces of timber and workpieces

6. Safety information

6.1 General safety information on electric power

tools

CAUTION

The following basic safety measures must be observed when

using electric tools for protection against electric shock, and the

risk of injury and ﬁre.

Read all these notices before using the electric tool and store

the safety instructions well for later reference.

Maintenance and service

1. Regular cleaning, maintenance, and lubrication.

Pull out the mains plug before making any settings, service or

repair work.

2. Only have your device repaired by qualiﬁed

specialists and only with original spare parts. This

ensures that safety of the device is maintained.

Safe work

1. Keep your work area tidy

–Disorder in the work area can lead to accidents.

2. Check the ambient conditions

–Do not expose electric tools to rain.

–Never use electric power tools in damp or wet loca-

tions.

–Make sure that the work area is well-illuminated.

–Do not use electric tools where there is a risk of ﬁre

or explosion.

3. Protect yourself against electric shocks

–Avoid physical contact with earthed parts (e.g. pipes,

radiators, electric ranges, cooling devices).

4. Keep other persons away

–Do not allow other persons, especially children, to

touch the electric tool or the cable. Keep them away

from your work area.

5. Securely store unused electric tools

–Unused electric tools should be stored in a dry, el-

evated or closed location out of the reach of children.

6. Do not overload your electric tool

–They will work better and more safely within their speci-

ﬁed capacity range.

7. Use the right tools

–Do not use low-output electric tools for heavy work.

–Do not use the electric tool for purposes for which it is

not intended. For example, do not use handheld circu-

lar saws for the cutting of branches or logs.

8. Wear suitable clothing

–Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

–When working outdoors, anti-slip footwear is recom-

mended.

–Wear a hair net if you have long hair.

9. Use personal safety equipment.

–Wear safety goggles.

–Use a dust mask when working on dusty jobs.

10. Connect up the dust extraction system

–If connections for dust extraction and a collecting de-

vice are present, make sure that they are connected

and used properly.

11. Do not use the cable for purposes for which it

is not intended

–Do not use the cable to pull the plug out of the socket.

Protect the cable from heat, oil and sharp edges.

12. Secure the workpiece

–Use the clamping devices or a vice to hold the workpiece

in place. In this manner, it is held more securely than with

your hand.

13. Avoid abnormal working postures.

–Make sure you stand squarely and keep your balance

at all times.

14. Take care of your tools

–Keep cutting tools sharp and clean in order to be able

to work better and more safely.

–Follow the instructions for lubrication and for tool re-

placement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDS 120 B2 - IAN 322849 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDS 120 B2 - IAN 322849 Manual

Product: