595404

Parkside PDEXS 150 A1 - IAN 64578 Manual

32
Zoom out
Zoom in
Previous page
1/45
Next page
32 GB/MT
DANGER OF INJURY! Disconnect the device
from the com
pressed air source before carrying
out any repairs or maintenance of the device
or moving it to another location.
Take precautions to ensure that other
people are not contaminated (dust
generation).
Do not remove rating plates or labels - they
are safety-relevant parts of the device.
If you are inexperienced in the use of this type
of device, you should seek out information or
training to learn how to handle it safely.
Always use a quick-release coupler to
connect this device to a compressor.
When emptying the dust bag, take
care not to send any sanding dust into
the air. Do not inhale the sanding dust.
Always disconnect this device from the
compressed air supply before you:
- Replace a sanding sheet or backing
plate
- Rectify malfunctions or
- If the device is defective
Protect the device and in particular
the compressed air connection and
operating controls from dust and dirt.
CAUTION! DANGER OF FIRE!
Ensure that the material being
ground and the grinder itself
do not overheat. Always empty the dust
container before taking a break from work.
Grinding dust in the dust sack, microfilter, paper
sack (or in the filter sack or filter of the vacuum
cleaner) can ignite automatically under unfa-
vour-able conditions such as flying sparks when
metal is being ground. There is a par-ticular
hazard if the grinding dust is mixed with paint
or polyurethane residues or other chemical
substances and the material being ground is hot
after being worked on for a prolonged period.
TOXIC VAPOURS! The work-
ing of materials that can produce harmful / tox-
ic dusts presents a health risk for the operator
and for people located in the close vicinity.
When working for extended periods
on wood and, in particular, materials
that produce dusts that are hazardous
to health, connect the appliance to an
appropriate external suction device.
Do not soak materials or surfaces to
be worked with liquids containing
solvents.
Avoid sanding lead-based paints or
other materials that are hazardous to
health.
Material containing asbestos may not
be worked. Asbestos is considered to be a
carcinogen.
Avoid contact with the moving sand-
ing sheet.
Use the appliance only with a sanding
sheet in place.
The appliance must always be kept
clean, dry and free of oil or grease.
Keep your workplace clean. Material
mixtures are particularly dangerous. Light metal
dust can burn or explode.
Secure the workpiece. A workpiece held
in a clamp or vice is kept more securely in place
than one held by your hand.
Never support yourself by placing your
hands near or in front of the device or
the workpiece surface. A slip can result
in injury.
Ensure that flying sparks do not endan-
ger the safety of other people. Remove
combustible materials from your working area.
Flying sparks are often created while you are
abrading metals.
Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
Permit the switched off appliance to
come to a complete standstill before
putting it down.
Original accessories / tools
Use only the accessories detailed in the
operating instructions. The use of inserted
tools or accessories other than those recom-
mended in the operating instructions could lead
to you suffering an injury.
Safety advice
64578_par_Druckluft-Exzenterschleifer_content_LB5.indd 32 27.06.11 16:21
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDEXS 150 A1 - IAN 64578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 150 A1 - IAN 64578 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDEXS 150 A1 - IAN 64578

Parkside PDEXS 150 A1 - IAN 64578 User Manual - German, Dutch, French, Italian - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info