Manual Parkside PDEXS 125 A1 - AN 304779 (page 8 of 64) (English, German, Dutch, Danish, French)

679415

Zoom out

Zoom in

1/64

PDEXS 125 A1

│

5 ■

Hazards in the workplace

■ Slipping, tripping up and falling are the main

causes of injuries at the workplace. Take note

of surfaces which could have become slippery

through use of the machine, and also any trip-

ping hazards caused by air or hydraulic hoses.

■ These sanding machines for sanding sheets or

polishers are not intended for use in explosion-

capable atmospheres and is not insulated

against contact with electrical power sources.

■ Ensure that no electrical service lines, gas pipes,

etc. that could cause a hazard if damaged by

use of the machine are present.

Risks due to dust and vapours

■ The dust and vapours produced by using the

sanding machine for abrasive media and pol-

ishing can be hazardous to health (e.g. cause

cancer, birth defects, asthma and/or dermati-

tis); it is essential to carry out a risk assessment

in respect of these risks and to implement cor-

responding regulatory mechanisms.

■ The risk assessment should include all dust

caused by the use of the machine and any

existing dust that may be whirled up at the

same time.

■ The sanding machine for sanding sheets or

polisher is to be operated and maintained in ac-

cordance with the recommendations contained

in this manual to keep the release of dust and

vapours to a minimum.

■ The exhaust air should be routed so that the

raising of dust in already dusty environments is

kept to a minimum.

■ If dusts or vapours are created, the main priority

must be to control these at the site of their release.

■ All inserts or accessories of the machine intended

for collecting, extracting or suppressing airborne

dust or vapours or should be used and serviced in

accordance with the manufacturer’s instructions.

■ Consumables/machine tools should be se-

lected, maintained and replaced in accordance

with the recommendations in this guide in order

to avoid unnecessary intensiﬁcation of dust or

vapour production.

■ Use breathing equipment as per the instructions

provided by your employer or as required by

health and safety regulations.

Risks due to noise

■ Exposure to high noise levels can result in per-

manent hearing damage, loss of hearing and

other problems such as tinnitus (ringing, rushing,

whistling or buzzing in the ear) if suﬃcient hear-

ing protection is not worn. It is essential that a

risk assessment with regard to these hazards

is carried out and that appropriate regulating

mechanisms are implemented.

■ Suitable regulatory mechanisms include the use

of insulation materials to avoid pinging occurring

on the workpieces and similar measures.

■ Use ear protection equipment as per the instruc-

tions provided by your employer or as required

by health and safety regulations.

■ The sanding machine for sanding sheets or

polisher is to be operated and maintained in ac-

cordance with the recommendations contained

in this manual to reduce any unnecessary in-

crease of the noise levels.

■ Consumables/machine tools should be selected,

maintained and replaced in accordance with

the recommendations in this guide in order to

avoid unnecessary increase of the noise levels.

■ If the sanding machine for sanding sheets or

the polisher is equipped with a silencer, always

ensure that this in its place and is operational

while the machine is in operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDEXS 125 A1 - AN 304779 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDEXS 125 A1 - AN 304779 Manual

Product: