Manual Parkside PDBS 6.2 A1 - IAN 43096 (page 37 of 39) (English, German, Dutch)

595286

Zoom out

Zoom in

1/39

37 GB

Lubricating the cutting shears

Turn the tool over so the compressed air connec-

tion is facing up, and add a few drops of oil for

compressed air tools or SAE 10–20 motor oil

to the compressed air connection of the com-

pressed air unit.

Activate the trigger

to allow the oil to dis-

tribute better.

Hold a rag or absorbent paper towel in front

of the air discharge opening and operate the

device in idle for a few seconds.

ATTENTION! Remove the compressed air connec-

tion before performing maintenance!

Excess oil will be blown out. K

eep

persons or objects away from the discharge.

Storing the cutting shears

Store the compressed air tool in dry rooms,

protected from the eﬀects of weather.

Ensure moisture does not enter the compressed

air unit.

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer,

the warranty for this device is 3 years from the date

of purchase. In the event of product defects, you

have

legal rights against the retailer of this product. Your

statutory rights are not limited in any way by our

warranty detailed below.

Warranty terms

The warranty period begins on the date of purchase.

Please retain the original receipt safely. This document

is required as your proof of purchase.

Should this device show any fault in materials or

manufacture within three years from date of purchase,

it will be repaired or replaced – at our choice – by

us free of charge. This warranty is conditional on the

defective device and the proof of purchase (receipt)

being presented within the three year warranty pe-

riod, and that there is a brief written description of

the nature of the defect and of the date it arose.

If the defect is covered by our warranty, we will re-

turn the repaired device or replacement thereof. A

repair or exchange of the device does not extend a

new warranty period.

Extent of warranty

The appliance has been manufactured to strict qua-

lity guidelines and meticulously examined before

delivery.

The warranty applies to faults in material or manuf-

acture. This warranty does not apply to product p

arts

subject to normal wear and tear and which can the-

refore be considered as wear items, or to damage

to fragile parts, e.g. switches, storage batteries or

glass parts.

This warranty becomes void if the device has been

damaged or improperly used or maintained. All in-

structions provided in the operating instructions must

be followed strictly to constitute proper use of the

product. Purposes and practices which the opera-

ting instructions warn of or advise against must be

avoided without fail.

This product is intended for private, non-commercial

use only. Any incorrect or improper use of the de

vice,

use of force and changes not performed by our

authorized service branch will void the warranty.

Processing of warranty claims

Please follow the instructions below to ensure quick

processing of your claim:

When inquiring about your product please have

your receipt and product number (e.g. IAN) ready

as your proof of purchase.

Cleaning and storage / Information about warranty and service processing

Start-up / After initial use / Cleaning and storage

43096_par_Druckluft-Blechschere PDBS 6.2A1_content_DE_NL.indd 37 28.05.14 16:57

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDBS 6.2 A1 - IAN 43096 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDBS 6.2 A1 - IAN 43096 Manual

Product: