595286
30
Zoom out
Zoom in
Previous page
1/39
Next page
30 GB
Introduction
Air metal shears PDBS 6.2 A1
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating instruc-
tions and the safety advice below. Initial operation of
this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
The metal shears are an air-powered tool for hand-
yman use. It is designed to cut sheet metal. The user
should wear safety goggles and gloves to protect
himself from accidental contact with potentially sharp
e
dges. Keep these instructions in a safe place. Whe
n
passing this product on to others, please also incl
ude
all the documents. Any use other than the intended
is prohibited and potentially dangerous. Damages
resulting from noncompliance or misuse are not cov-
ered by the warranty and are not included in the man-
ufacturer‘s liability. This device has been designed
for household use and may not be used for commer-
cial or industrial purposes.
Features
Check that all the items are present and
that the product is in perfect condition
immediately after unpacking. Never use
the product if it is defective.
1
Plug nipple for compressed air connection
2
Trigger
3
Knife
Technical Data
Max. working pressure: 6.2 bar
cuts aluminium sheets up to 2.4 mm
cuts sheet metal up to 1.1 mm
Weight: 1220 g
Noise and vibration
ATTENTION!
Always wear hearing protection!
The following pictograms are used in these operating instructions / on the equipment:
Please read the operating instructions!
Never use hydrogen, oxygen, carbon
dioxide or other bottled gases as an
energy source.
Note
Wear ear protection, dust mask, safety
glasses and protective gloves.
Observe the warning and safety in-
structions!
Compressed air hose
Caution! Explosion hazard!
Dispose of packaging and device in
an environmentally-friendly way!
Oil daily
Introduction / General safety rules
43096_par_Druckluft-Blechschere PDBS 6.2A1_content_DE_NL.indd 30 28.05.14 16:57
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDBS 6.2 A1 - IAN 43096 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDBS 6.2 A1 - IAN 43096 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info