595310

Parkside PBSG 95 B1 - IAN 108189 Manual

7
Zoom out
Zoom in
Previous page
1/45
Next page
7 GB/IE
Introduction / General safety advice
the value specified depending on how the power
tool is used.
If you wish to make an accurate assessment of the
vibration loads experienced during a particular pe-
riod of work, you should also take into account the
periods when the tool is switched off or is running
but is not actually in use. This can result in a much
lower vibration load over the whole of the period
of working.
Q
General safety advice
CAUTION! In order to protect yourself
from the danger of electric shock, injury
or fire when using electrical power tools,
please observe the following basic safety precau
tions.
Read all these requirements before you use the elec-
trical power tool, and keep the safety advice in a
safe place.
Q
Working safely
1. K
eep your working area clean and tid
y.
A disorderly working area can lead to accidents.
2. Be aware of the effects of the
environment.
Do not leave electrical power tools out in the rain.
Do not use electrical power tools in moist or
wet surroundings.
Ensure that your working area is well lit.
Do not use electrical power tools in areas
where there is risk of fire or explosion.
3. Protect yourself from electric shock.
Avoid touching earthed objects such as pipes,
heating radiators, ovens or refrigerators with
parts of your body.
4. Keep other people at a safe distance.
D
o not allow other people, in particular childre
n,
to touch the electrical power tool or the mains
lead. Keep them away from your working area.
5. Store currently unused electrical power
tools in a safe place.
When not being used electrical power tools
should be stored in dry conditions in a high or
enclosed place, out of reach of children.
6. Do not overload your electrical power
tool.
By keeping within the specified working range
of the tool you will work more safely and achieve
a better result.
7. Use the right electrical power tool for
the task.
Do not use low-output devices for heavy tasks.
Do not use an electrical power tool for purposes
for which it was not intended. For example, do
not use a hand operated circular saw for trim-
ming tree branches or cutting logs.
8. Wear suitable clothing.
Do not wear loose-fitting clothing or jewellery.
They could become caught on moving parts.
We recommend that you wear anti-slip footwear
when working outdoors.
If you have long hair, wear a hair net.
9. Use personal protective equipment.
Wear protective glasses.
Wear ear protection.
Wear a dust mask if your work generates dust.
10. Attaching the vacuum dust extraction
device.
Where there are connection points provided
for vacuum dust extraction please ensure that
the connections are made and used properly.
11. Do not use the mains lead for purpos-
es for which it was not intended.
Do not use the mains lead to pull the plug out
of the mains socket. Protect the mains lead
from heat, oil and sharp edges.
12. Securely support the workpiece.
Use clamps or a vice to grip the workpiece firmly.
This is much safer than holding it with your hand.
13. Avoid placing your body in an
unnatural position.
Keep proper footing and balance at all times.
14. Look after your tools carefully.
Keep cutting tools sharp and clean. This way you
will work more safely and achieve better results.
Follow the advice on tool lubrication and con-
sumables replacement.
Check the condition of the mains lead on your
electrical power tool regularly and have any
damage repaired by a competent specialist.
Introduction
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBSG 95 B1 - IAN 108189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBSG 95 B1 - IAN 108189 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PBSG 95 B1 - IAN 108189

Parkside PBSG 95 B1 - IAN 108189 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info