Manual Parkside PBKS 53 A1 - IAN 315116 (page 26 of 120) (English, German, Dutch, French)

782041

Zoom out

Zoom in

1/120

22 GB/IE

■ Wear a dust mask when sawing dry wood. Sawing can gen-

erate sawdust.

Storage and transportation

■ Switch oﬀ the chainsaw before moving it anywhere, even

short distances. Engage the chain brake and put on the

chain guard.

■ Always use the chain guard for transportation and storage.

■ Protect the machine during transport (also in vehicles)

against tipping over to prevent fuel loss, damage or injuries.

■ Carry the appliance by the front handle only. The guide rail

then faces to the rear, away from your body (see ﬁg. K).

■ Hold the hot exhaust silencer away from your body. There

is a risk of burns!

■ Clean and maintain the chainsaw before storage.

■ Store the appliance in a secure and dry location.

■ Secure it against unauthorised access.

Environmental safety

■ National and/or local regulations may restrict the use of

noise-generating, motor-driven appliances during certain

times. Ask at your local authority.

■ Do not operate the appliance in conﬁned spaces or other

poorly ventilated areas. Risk of suﬀocation from poisonous

exhaust fumes/lubricating oil vapours.

■ Work only in daylight.

■ Do not work in inopportune weather conditions, such as rain

or wind. This will lead to an increased risk of accidents.

■ Keep work area clean and tidy.

■ Keep children, other people and animals at a distance be-

fore and during the work. Distractions can cause you to lose

control.

■ Before starting work, ensure that no people, animals or valu-

able property are inside the danger zone.

■ Do not work in the vicinity of wire fences or areas with loose

old wire.

■ If you are working in a combustible environment, e.g. on dry

grass, have a ﬁre extinguisher on hand. There is a risk of ﬁre!

Adding fuel

■ Petrol is highly ﬂammable! When ﬁlling the tank, keep at a

distance from open ﬂames and do not smoke. There is a risk

of ﬁre!

■ Ensure that you do not spill any petrol. Do not allow petrol

and chain oil to get into the soil. Lay down suitable tarpaulins

or similar.

■ Fill up the tank only in well-ventilated areas. Petrol vapours

are highly inﬂammable and can explode.

■ Switch oﬀ the engine before refuelling and allow the appli-

ance to cool down. If you spill any petrol, clean the aﬀected

area immediately. Do not allow petrol to come into contact

with your clothing. If this happens, get changed immediately.

■ Avoid skin or eye contact with petrol or lubricants (oil).

■ Do not inhale any petrol/lubricating oil vapours.

■ Check for leaks. If petrol leaks out, do not start the engine.

There is a risk of burns.

■ Be careful when removing the petrol cap so that any pres-

sure can escape slowly and no petrol sprays out.

Before use

m WARNING!

Always carry out checks before use and with the engine

switched oﬀ.

Prior to each use and after it has been dropped, check that

your device is safe to operate.

Check whether moving parts work properly. Many accidents

are caused by poorly maintained tools. Have any damage re-

paired by qualiﬁed specialists.

Use the chainsaw and accessories only as described in these

instructions, taking into account the working conditions and the

work to be performed. Use of machine tools for operations dif-

ferent from those intended could result in a hazardous situation.

■ Check the chain brake is in good working order regularly

(front hand guard, see ﬁg. E).

■ Check that the guide rail is correctly ﬁtted.

■ Check that the saw chain is correctly tensioned. Follow the

instructions for lubrication, chain tension and changing ac-

cessories. An incorrectly tensioned or lubricated chain can

break or increase the risk of kickback.

■ Keep cutting tools sharp and clean. Sharpen them regularly

and replace worn parts promptly. Properly maintained cut-

ting tools with sharp cutting edges are less likely to bind and

are easier to control.

■ Check the throttle control and the throttle control lock for

freedom of movement. The throttle control must spring back

into the start position.

■ Check whether there is enough fuel and chain lubrication

oil in the tank.

■ Check whether the handles are clean, dry and free of oil

and dirt.

■ Never carry out the work alone. In case of emergency, some-

one should be close by.

■ Use the chainsaw only if you are standing on ﬁrm, safe and

even ground. Do not overreach. Slippery ground or unstable

standing surfaces (e.g. on a step ladder) can lead to a loss

of balance or loss of control of the chainsaw. Keep proper

footing and balance at all times. This enables better control

of the chainsaw in unexpected situations.

■ Do not work with the chainsaw in a tree. When working in a

tree there is a risk of injury.

■ Never saw above shoulder height.

■ Always hold the chainsaw with your right hand on the rear

handle and your left hand on the front handle (see ﬁg. E).

Holding the chainsaw in an inverted working posture in-

creases the risk of injuries and is prohibited.

■ When the chainsaw is running, keep all body parts away

from the saw chain. Before starting the chainsaw, make sure

that the saw chain is not touching anything. When working

with a chainsaw, a moment of inattentiveness can lead to

clothing or body parts getting caught in the saw chain.

■ Switch the chainsaw oﬀ immediately if you notice any chang-

es in the way the appliance behaves.

■ If the chainsaw hits a stone, nails or other hard objects, stop

the engine immediately and check the saw chain and the

guide rail for damage.

■ Do not drop the chainsaw, knock it against obstructions and

do not use the guide rail as a lever.

■ Use the chainsaw only for sawing wood.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBKS 53 A1 - IAN 315116 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PBKS 53 A1 - IAN 315116 Manual

Product: