684702
26
Zoom out
Zoom in
Previous page
1/188
Next page
26
GB IE
4. Rotate the keyless chuck (17)
counter-clockwise, until the drill
chuck aperture is large enough to
accommodate the tool.
5. Push the tool as far as possible
into the keyless chuck (17).
6. Rotate the chuck clockwise to
clamp the tool rmly.
Removing tools with hexago-
nal and cylindrical shafts
7. To remove the tool again, rotate the
keyless chuck (1) and pull out the tool.
Removing the keyless chuck
1
Pull the locking sleeve (3) back-
wards and remove the keyless
chuck.
Operation
Selecting the operating mode
The “drilling/impact drilling” changeover
switch (
4) allows you to select the elec-
trical tool operating mode.
Only change the operating mode
when the electrical tool is switched
on! The electrical tool may be da-
maged otherwise.
The “impact drilling” opera-
ting mode may only be used
if the keyless chuck is not at-
tached!
Unlock the changeover switch ( 4) by
pushing the retaining knob (
5).
Turn the “drilling/impact drilling” changeo-
ver switch (
4) into the desired position.
The retaining knob (
5) will audibly lock
into place once the nal position has been
reached.
Impact drilling = striking mecha-
nism ON
Drilling/screwing = striking mecha-
nism OFF
Set the direction of rotation
You can select the direction of rotation
with the direction switch (
7) (clockwise
and anticlockwise direction) and secure
the device against accidental start up.
1. Wait for the device to shut-down.
2. Clockwise direction:
Press direction switch (7)
to the right.
3. Anticlockwise direction:
Press direction switch (7)
to the left.
4. Switch lock: Bring direction
switch to neutral position.
The direction changed may only be
performed in standstill mode.
Switching on/off
By using the on/off switch ( 8) you can
progressively control the speed. The longer
you push the on-off button, the higher the
speed.
1. Press and hold the on/off switch
(8) to start the device. The LED
work light (11) lights up during
operation.
2. To turn it off, release the on/off
switch (8).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PBHA 12 A1 - IAN 312202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PBHA 12 A1 - IAN 312202 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info